1976 Chevyvan G30 stiff accelerator pedal

Brentdavis13 · Jan 31, 2025

Hi there.

My Chevyvan G30's accelerator pedal is quite stiff to push when accelerating and also even when the ignition is off. The engine is a refurbished V8 with only 500 miles on it. The air filter is not old by any means. I wonder, is it the spring that the accelerator cable is connected to?

Does anyone have any tips?

Matt69olds · Feb 1, 2025

Make sure the cable isn’t twisted or kinked, look for obvious damage. Unhook the throttle from the carb, does the carb throttle plates move freely? If not, try moving the throttle with it unhooked.

Find out why the throttle is stiff. Having a pedal that is hard to push is an inconvenience. Having a throttle that sticks in the open position is dangerous!!

PrairieDrifter · Feb 1, 2025

Guarantee it's the cable. I switch mine to mechanical linkages. Probably not easily done on a van.

Brentdavis13 · Feb 3, 2025

thankfully it doesn't stick! and I'm glad that is not a problem that I have to fix. I will check out your suggestions, thanks!

1lejohn · Feb 3, 2025

My throttle pedal is also a workout for my right leg. On my application I think it's the angle the cable is in to reach the carb.

1976 Chevyvan G30 stiff accelerator pedal

Brentdavis13

Junior Member

Matt69olds

Full Access Member

PrairieDrifter

Full Access Member

Brentdavis13

Junior Member

1lejohn

Full Access Member

Similar threads

Latest posts

Forum statistics