Old man constantly asked to drop his truck.Any stock height C10s left in the world??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,086
Reaction score
12,465
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Turbo4whl said:
There still things you are not considering about the 2 wheel drive suspension. Unless you change out the the upper spring mount location, (Beam structure) there is less spring full movement. Yes I did my '82 twice, first just cut coils and spaced out upper A arms.

Then changed upper and lower A arms with Chisholm suspension parts. The next limit is the inner fenders, need tubs up front to have the same travel distance. Use little tires up front, no not on mine. Drop spindles also means narrow wheels or more off set.

Finally your quote "No recent experience with drop springs for these trucks..." I'll state it again, the ride will not be the same, not bad, just different.
Click to expand...
Ok ya. With just drop spindles though the steering geometry doesn’t change nor does the spring rate.
And the slight difference in track width either way depending on who’s spindles you use, still allows for most all reasonable tire and wheel combos.
 
Last edited:
ali_c20

ali_c20

Full Access Member
Joined
Sep 20, 2016
Posts
1,346
Reaction score
1,949
Location
Austria
First Name
Alexander
Truck Year
1974, 1979
Truck Model
C20, K5
Engine Size
350, 350
TotalyHucked said:
I know most are just different taste/opinions, but there's a few that it's definitely hate and it's sad. There's plenty of things that aren't my style (donks and traditional lowriders for example) but I still like them and appreciate the work if it's done well. I'll rag on someone for doing poor/sketchy/unsafe/just plain dumb work but just a style difference, nah.
Click to expand...
I totally agree with you. The haters are out there and will not go away. I decided to ignore them long time ago cause hate has never done any good.
 
T

tubehead

Junior Member
Joined
Jul 1, 2013
Posts
22
Reaction score
48
Location
australia
First Name
richard
Truck Year
1986
Truck Model
c10 silverado
Engine Size
350
After reading all these posts I think I will just leave it stock for now.
The wheels on it are 17 inch rally replicas which ride better over potholes and give me a better tire choice here in OZ but nobody ever picks them up as not being stock.
It currently has 340hp which is enough for its current ride height so will maybe drop it 3/4 if I go with more power later on.
Regardless no body modifications are going to happen while I own it.

Here is a pic with the 15 inch Cragars it arrives with when I bought it. Still the best look in my opinion but just rides so much nicer on alloy 17s.
You must be registered for see images attach
 
Last edited:
Rustisbest

Rustisbest

Driving > posting
Joined
Jul 20, 2021
Posts
208
Reaction score
542
Location
Athens, TN
First Name
Matt
Truck Year
1979
Truck Model
C10
Engine Size
377
Mine isn't lowered a whole lot. Ive hauled 2 skid steer buckets full of gravel, engines, axles, lumber, etc. Pulled a trailer with a sectional on it, it still gets used like a truck. I'll admit I'm stuck in the past with 15's and get harassed some locally about the rust and lack of nice paint though. I don't gotta worry about dents, dings, scrapes or keeping it pristine sitting somewhere being a garage ornament is how I see it lol.

You must be registered for see images attach
 
silverbackreef

silverbackreef

Junior Member
Joined
Mar 18, 2023
Posts
21
Reaction score
35
Location
FL
First Name
Dude
Truck Year
1986
Truck Model
C10
Engine Size
305
Stock height, stock rally rims. No interest in changing.

I can reach the middle of the bed from the side of the truck. Part of what put me back in an SB after 45 years.
 
T

tubehead

Junior Member
Joined
Jul 1, 2013
Posts
22
Reaction score
48
Location
australia
First Name
richard
Truck Year
1986
Truck Model
c10 silverado
Engine Size
350
Rustisbest said:
Mine isn't lowered a whole lot. Ive hauled 2 skid steer buckets full of gravel, engines, axles, lumber, etc. Pulled a trailer with a sectional on it, it still gets used like a truck. I'll admit I'm stuck in the past with 15's and get harassed some locally about the rust and lack of nice paint though. I don't gotta worry about dents, dings, scrapes or keeping it pristine sitting somewhere being a garage ornament is how I see it lol.

Mine looks pretty but has worked for a living since the day I bought it ... does live in a workshop though. ;)
Click to expand...
 
You must log in or register to reply here.

Similar threads

Soundmound
PNW Square Buddy
2
Replies
26
Views
4K
pnwnvrdn
pnwnvrdn
T
82 gmc 1500 seems to be leveled... So what do I need to do to drop it?
Replies
9
Views
2K
DarthKnight84
DarthKnight84
M
1989 Chevy Suburban 350 - stalls when in forward or reverse while breaks are engaged
Replies
9
Views
4K
Mike89Suburban
M
M
New to the Forum World
Replies
11
Views
3K
my2000tl
M

Latest posts

Forum statistics

Threads
44,414
Posts
956,951
Members
36,735
Latest member
rljohnson013
Top