Olds 350 diesel to sbc swap

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ryanbrown36

Junior Member
Joined
Nov 17, 2024
Posts
17
Reaction score
15
Location
Ontario, Canada
First Name
Ryan
Truck Year
1981
Truck Model
c1500
Engine Size
350
Hi guys, I’m looking for some help on my olds 350 diesel to sbc swap, I have completed the swap and will be starting the truck up soon but have some questions about the tank situation. I have a dual tank setup and replaced the driver side tank with a new one to make sure there was no diesel left but my old passenger side tank is still on the truck and would like to know if I should plug that off somehow and where it’s best to do so(my fuel lines are All fresh from the new tank to the motor) for reference I’m 17 and have been doing this by myself so might be a dumb question but don't really know what I’m doing and want any old diesel getting in my fuel system. Thanks in advance
 

Ryanbrown36

Junior Member
Joined
Nov 17, 2024
Posts
17
Reaction score
15
Location
Ontario, Canada
First Name
Ryan
Truck Year
1981
Truck Model
c1500
Engine Size
350
Wait... you have a 350 diesel??
That's cool
Yes was originally a olds 350 diesel but the injector pump went and for what I was quoted for a rebuild it wasn’t worth it to keep it, the motor had 144k on it and never had a head gasket, ran like a top until the injector pump started to bugger up
 

Ryanbrown36

Junior Member
Joined
Nov 17, 2024
Posts
17
Reaction score
15
Location
Ontario, Canada
First Name
Ryan
Truck Year
1981
Truck Model
c1500
Engine Size
350
If you're only going to run 1 tank hook everything to the one tank eliminating the selector valve and possible problems.
thanks for the help, so am I just disconnecting the two lines running the the passenger tank or plugging them? And it’s these back line in the photo right?
 

Attachments

  • IMG_6563.jpeg
    IMG_6563.jpeg
    170.6 KB · Views: 15

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,218
Reaction score
12,013
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
If you're set on running one tank follow the advice above.

However, with a gas engine you may find yourself missing that extra fuel. You can just drain the tank and blow out the lines. As long as the fuel isn't contaminated it's nothing to worry about.
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,446
Reaction score
8,678
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
A little diesel in your gas won't hurt a thing,some guys intentionally add it as top end lubricant. I think it's BS but it doesn't hurt their stuff. And personally I'd rather use the passenger side tank. My weight on one side, fuel weight on the other,hopefully keep the springs from sagging uneven.
 
Last edited:

Ryanbrown36

Junior Member
Joined
Nov 17, 2024
Posts
17
Reaction score
15
Location
Ontario, Canada
First Name
Ryan
Truck Year
1981
Truck Model
c1500
Engine Size
350
If you're set on running one tank follow the advice above.

However, with a gas engine you may find yourself missing that extra fuel. You can just drain the tank and blow out the lines. As long as the fuel isn't contaminated it's nothing to worry about.
I’m not totally set on running one tank forever but I think for now to get it on the road as it will be my daily driver I just want one. There’s still some diesel in the other tank so just don’t want any problems for the start up and for the month I might get to drive it, thanks
 

Ryanbrown36

Junior Member
Joined
Nov 17, 2024
Posts
17
Reaction score
15
Location
Ontario, Canada
First Name
Ryan
Truck Year
1981
Truck Model
c1500
Engine Size
350
A little diesel in your gas won't hurt a thing,some guys intentionally add it as top end lubricant. I think it's BS but it doesn't hurt their stuff. And personally I'd rather use the passenger side tank. My weight on one side, fuel weight on the other,hopefully jeep the springs from sagging uneven.
Do you think If I were to drain passenger tank to the best of my ability and fill it up with gas it would be fine to run the two tanks? I have blown out all the lines from the driver side tank to the fuel pump as they were already new
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,438
Reaction score
28,342
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Do you think If I were to drain passenger tank to the best of my ability and fill it up with gas it would be fine to run the two tanks? I have blown out all the lines from the driver side tank to the fuel pump as they were already new

Yeah, just dump the diesel and fill with gas. It will be fine. Or even suck the diesel out and fill with gas.


I'm intrigued by that selector valve. That 6 port valve looks nothing like the 6 port valve on my gas trucks.
 

Ryanbrown36

Junior Member
Joined
Nov 17, 2024
Posts
17
Reaction score
15
Location
Ontario, Canada
First Name
Ryan
Truck Year
1981
Truck Model
c1500
Engine Size
350
Yeah, just dump the diesel and fill with gas. It will be fine. Or even suck the diesel out and fill with gas.


I'm intrigued by that selector valve. That 6 port valve looks nothing like the 6 port valve on my gas trucks.
Ok thanks for the help, it is a 6 port and I was also confused as the photos I looked up did not look like mine, might be a Oldsmobile thing
 

77Dmax

Member
Joined
Nov 10, 2024
Posts
37
Reaction score
77
Location
vt
First Name
Joe
Truck Year
1977
Truck Model
c20
Engine Size
6.6
An olds 455 would have been a bolt in swap! Cap the lines until you're ready to drain and hook them up..
 

Ryanbrown36

Junior Member
Joined
Nov 17, 2024
Posts
17
Reaction score
15
Location
Ontario, Canada
First Name
Ryan
Truck Year
1981
Truck Model
c1500
Engine Size
350
An olds 455 would have been a bolt in swap! Cap the lines until you're ready to drain and hook them up..
I would’ve loved to drop a 455 in there but I couldn’t find one and it is my daily driver so needed something quick and found a deal on a sweet sbc that I couldn’t turn down, are you saying cap the two ports going to the passenger tank on the selector valve for now?
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,446
Reaction score
8,678
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
I would’ve loved to drop a 455 in there but I couldn’t find one and it is my daily driver so needed something quick and found a deal on a sweet sbc that I couldn’t turn down, are you saying cap the two ports going to the passenger tank on the selector valve for now?
Just hook everything up as normal,leave your selector valve set to drivers side tank. When ready to run the passenger side tank syphon the diesel add a couple of gallons of gas drive it a couple of days syphon it again. Fill it,switch tanks,done.
 
Last edited:

Strick

Full Access Member
Joined
Nov 25, 2020
Posts
1,354
Reaction score
3,315
Location
Dunn, NC
First Name
Harold
Truck Year
1979
Truck Model
C20 Crew
Engine Size
350
Welcome to the club fella. I just passed up a Canadian GMC that was a 5.7 diesel. Good luck in your swap & daily driver.

HS
 

Latest posts

Forum statistics

Threads
44,157
Posts
950,582
Members
36,271
Latest member
jstewart7501
Top