Intake Options

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

cbpercy06

cbpercy06

Junior Member
Joined
Aug 12, 2024
Posts
7
Reaction score
10
Location
Maine
First Name
Calvin
Truck Year
1987
Truck Model
V1500
Engine Size
327
My '87 had an L83 out of an '82 Corvette swapped in at some point. The X-fire system was replaced with an Edelbrock 4bbl 650. I'd like to replace my intake manifold with something that flows better than the pos that is currently on it (#462624), and doesn't have an EGR valve. The issue I currently have is that the EGR was disconnected, and then the valve was crushed until it fit under the air cleaner (not my doing). I cut the valve off and made a plate to fit the hole, but I can't get the motor to run right unless said plate has a small hole in it. Not sure if this is due to incompetence or if it really does need the extra air, but either way I'd like to get rid of the issue altogether and hopefully make a little more power while I'm at it. Apologies for the novel.

TLDR: looking for a decent street intake for an L83 Corvette engine.
 
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,446
Reaction score
8,681
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
cbpercy06 said:
My '87 had an L83 out of an '82 Corvette swapped in at some point. The X-fire system was replaced with an Edelbrock 4bbl 650. I'd like to replace my intake manifold with something that flows better than the pos that is currently on it (#462624), and doesn't have an EGR valve. The issue I currently have is that the EGR was disconnected, and then the valve was crushed until it fit under the air cleaner (not my doing). I cut the valve off and made a plate to fit the hole, but I can't get the motor to run right unless said plate has a small hole in it. Not sure if this is due to incompetence or if it really does need the extra air, but either way I'd like to get rid of the issue altogether and hopefully make a little more power while I'm at it. Apologies for the novel.

TLDR: looking for a decent street intake for an L83 Corvette engine.
Click to expand...
It should not need a hole. The hole is masking another problem. When you fix the real problem you may not think the system you have is a P.O.S and most likely will pickup some power. What problem do you have when the hole is plugged. It isn't running right now, if you have an intentional vacuum leak. WAG is ignition isn't set up right and your designed in vacuum leak is increasing idle speed. Make sure your vacuum advance can is hooked up to manifold and is a working unit. Timing set at 34 degrees( for now) total advance,engined revved until advance stops,vacuum advance disconnected and plugged. Then reconnect vacuum advance. What manifold do you have,not having luck with the numbers you provided.
 
Last edited:
cbpercy06

cbpercy06

Junior Member
Joined
Aug 12, 2024
Posts
7
Reaction score
10
Location
Maine
First Name
Calvin
Truck Year
1987
Truck Model
V1500
Engine Size
327
When the hole is plugged the engine has no low end power at all, regardless of timing or idle fuel screw position. The main reason I'm looking for a different intake is that the one that's on it is extremely restrictive, the heads are hypothetically pretty good but GM choked them with a small intake due to smog regulations. It's not a common or desirable manifold, which is probably why there's not anything about it online.
 
R

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,446
Reaction score
8,681
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
cbpercy06 said:
When the hole is plugged the engine has no low end power at all, regardless of timing or idle fuel screw position. The main reason I'm looking for a different intake is that the one that's on it is extremely restrictive, the heads are hypothetically pretty good but GM choked
them with a small intake due to smog regulations. It's not a common or desirable manifold, which is probably why there's not anything about it online.
Click to expand...
Something funny is going on here, you are talking about a crossfire engine,which had 2 throttle bodies. Now it has a single 4 barrel,but you are talking about the heads are good but gm choked them with an oddball manifold. GM didn't put a 4bbl manifold on a crossfire engine. How bout a pic of this manifold, and I've never heard of a factory GM 4bbl manifold restrictive for smog purposes,that's B.S. A restricted manifold will not help with smog.Is this the same engine that was a 327 on Sept 12th? I am very interested in what you have,and what's going on here. Pics please
Here's some options for you. These are all dual plane,which is what I'd recommend on a basically stock sbc. I think first we need to find out what you actually have,engine and intake and carbureator wise https://www.hotrod.com/how-to/dual-plane-intake-manifold-comparisons/
 
Last edited:
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,439
Reaction score
28,345
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Did the heads used on the Crossfire engines not have really tiny ports like the crossfire intake? It's been a while and I can't remember.

At any rate, I agree, you shouldn't need the hole. It is a bandaid for something not right.
 
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,439
Reaction score
28,345
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
But anyway, as far as your intake options go, there's a very large selection of square bore intakes for a Chevy small block. Even among the dual plane style that is best suited for street, there's oodles of options.
 
bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,439
Reaction score
28,345
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I don't know if this link will work how I want, but Summit Racing lists 69 different manifolds that are for a small block Chevy, non-vortec, dual plane and also square bore compatible.

www.summitracing.com

Small Block Chevy 350 Gen I Carbureted Intake Manifolds | Summit Racing

Find CHEVROLET 5.7L/350 Chevy small block Gen I Intake Manifolds, Carbureted Dual plane Intake Style, 4-barrel square bore Carburetor Mounting, Stock configuration Cylinder Head Type and get Free Shipping on Orders Over $109 at Summit Racing!
www.summitracing.com www.summitracing.com
 
ali_c20

ali_c20

Full Access Member
Joined
Sep 20, 2016
Posts
1,300
Reaction score
1,853
Location
Austria
First Name
Alexander
Truck Year
1974, 1979
Truck Model
C20, K5
Engine Size
350, 350
bucket said:
I don't know if this link will work how I want, but Summit Racing lists 69 different manifolds that are for a small block Chevy, non-vortec, dual plane and also square bore compatible.

www.summitracing.com

Small Block Chevy 350 Gen I Carbureted Intake Manifolds | Summit Racing

Find CHEVROLET 5.7L/350 Chevy small block Gen I Intake Manifolds, Carbureted Dual plane Intake Style, 4-barrel square bore Carburetor Mounting, Stock configuration Cylinder Head Type and get Free Shipping on Orders Over $109 at Summit Racing!
www.summitracing.com www.summitracing.com
Click to expand...
Only 69? How should one live with such few options.
 
You must log in or register to reply here.

Similar threads

T
Q-Jet Block Off Plate
2
Replies
17
Views
1K
84c10Tony
84c10Tony
T
Another exhaust options thread - what should I do?
2 3
Replies
32
Views
3K
Reggie1931
Reggie1931
D
1994 454 TBI High Idle
Replies
12
Views
790
Ricko1966
R
Y
TBI symptoms changed (new thread to reflect new problems)
Replies
11
Views
1K
chairmnofthboard
C
H
How to ID 16" 8 bolt wheels?
2
Replies
24
Views
1K
AuroraGirl
AuroraGirl

Latest posts

Forum statistics

Threads
44,157
Posts
950,602
Members
36,273
Latest member
dannyphx
Top