Advice on Transmission Fluid Change for 1980 C10

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,091
Reaction score
12,477
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
If it’s operating fine then absolutely change it. Sounds like a good truck if it’s never been apart and still is truckin.

If you don’t pump it out the cooler lines to get the majority of old out, I’d get a pan with a drain plug and change it about 4x depending how much comes out. That’ll effectively replace about 90% of it.
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,091
Reaction score
12,477
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
Grit dog said:
If it’s operating fine then absolutely change it. Sounds like a good truck if it’s never been apart and still is truckin.

If you don’t pump it out the cooler lines to get the majority of old out, I’d get a pan with a drain plug and change it about 4x depending how much comes out. That’ll effectively replace about 90% of it.
Click to expand...
Unless you’re lucky and there’s a drain plug in the tq converter but it’s not likely.
 
Turbo4whl

Turbo4whl

Supporting Member
Supporting Member
Joined
Oct 30, 2019
Posts
3,156
Reaction score
7,326
Location
Downingtown, PA
First Name
Wayne
Truck Year
1974
Truck Model
Jimmy
Engine Size
350
Grit dog said:
Unless you’re lucky and there’s a drain plug in the tq converter but it’s not likely.
Click to expand...
The only factory torque converter that had a drain plug in them were old Fords. (I've only ever seviced trucks, don't know about cars.) Aftermarket converters may have a plug, but the OP stated he believed the trans was not apart.
 
Camar068

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,341
Reaction score
3,393
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
Dex III is the same as Dex/Merc from what I've read.
 
A

AlabamaDan

Junior Member
Joined
Nov 3, 2024
Posts
23
Reaction score
34
Location
Alabama
First Name
Dan
Truck Year
1980
Truck Model
C10
Engine Size
350
Added more fluid and it drives great! Shifts smooth and all is well. Now, could someone please help me ID this trans from the pan? It's a leaking mess under there btw.
You must be registered for see images attach

You must be registered for see images attach
 
DoubleDingo

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,325
Reaction score
17,372
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
Look at post 2 of this thread
 
Dmack

Dmack

Full Access Member
Joined
Mar 13, 2019
Posts
342
Reaction score
449
Location
Central OR
First Name
Dave
Truck Year
1983
Truck Model
K20
Engine Size
350
TH350, aka turbo 350
 
75gmck25

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,304
Reaction score
2,276
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
Stock TH350 is a very durable, reliable transmission. Many sources of aftermarket parts if you want to build it to be even stronger.
 
A

AlabamaDan

Junior Member
Joined
Nov 3, 2024
Posts
23
Reaction score
34
Location
Alabama
First Name
Dan
Truck Year
1980
Truck Model
C10
Engine Size
350
DoubleDingo said:
Look at post 2 of this thread
Click to expand...
Well, there were a couple and I wasn't sure
Dmack said:
TH350, aka turbo 350
Click to expand...
That was one of my guesses
75gmck25 said:
Stock TH350 is a very durable, reliable transmission. Many sources of aftermarket parts if you want to build it to be even stronger.
Click to expand...
Good to know. After filling it back up with fluid, it ran and shifts fine. I probably won't rebuild unless I have to. That said, it appears to be leaking quite a bit, that's why it was low I guess. Now to find out where that leak is coming from. Also, it looks like there's a drain on that pan doesn't it! Seeing as how it was 2 1/2 quarts low, looks like if I just let it leak for a while it will change itself. lol

Also, judging by the RTV around the pan, at least the pan has been been dropped sometime in the last 45 years. My guess is that's at least one source of a leak. I might change the filter and pan gasket once I get some other things fixed.
 
Matt69olds

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,485
Reaction score
3,890
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
Yes, your pan has a drain plug. HydraMatic stopped installing drain plugs in the early 70s as a cost cutting move, so more than likely the pan or transmission has been swapped.

Possible leak spots: the transmission pan, dipstick tube or o-ring, kickdown cable seal, speedo cable seal, the oring around the vaccum modulator, rear seal, or the accumulator cover oring. Those call all be changed with the trans still installed. The o ring around the pump, or the seal around the torque converter neck could be leaking, but those require transmission removal and disassembly to repair.
 
JD Miller

JD Miller

Full Access Member
Joined
Sep 30, 2024
Posts
358
Reaction score
658
Location
Goober Idaho
First Name
JD
Truck Year
1981
Truck Model
K20 silverado
Engine Size
350
dex/merc,
take your pick at wallyworld. I just picked up several gallons of valvoline on sale
You must be registered for see images attach

You must be registered for see images attach
 
A

AlabamaDan

Junior Member
Joined
Nov 3, 2024
Posts
23
Reaction score
34
Location
Alabama
First Name
Dan
Truck Year
1980
Truck Model
C10
Engine Size
350
Matt69olds said:
Yes, your pan has a drain plug. HydraMatic stopped installing drain plugs in the early 70s as a cost cutting move, so more than likely the pan or transmission has been swapped.

Possible leak spots: the transmission pan, dipstick tube or o-ring, kickdown cable seal, speedo cable seal, the oring around the vaccum modulator, rear seal, or the accumulator cover oring. Those call all be changed with the trans still installed. The o ring around the pump, or the seal around the torque converter neck could be leaking, but those require transmission removal and disassembly to repair.
Click to expand...

Wouldn't surprise me to find out that my granddad or uncle at least changed the pan. I can hear them grumbling now about why would some engineer remove the drain plug ##$%$#...

Thanks for the places to look. Hopefully it isn't too bad.
 
Matt69olds

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,485
Reaction score
3,890
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
AlabamaDan said:
Wouldn't surprise me to find out that my granddad or uncle at least changed the pan. I can hear them grumbling now about why would some engineer remove the drain plug ##$%$#...

Thanks for the places to look. Hopefully it isn't too bad.
Click to expand...

Any GOOD engineer would design a product with routine maintenance in mind. A good engineer knows the importance of maintenance.

Without a doubt, the bean counters vetoed the drain plug!!

Bean counters play an important part in manufacturing, but I think they have way too much power.
 
You must log in or register to reply here.

Similar threads

A
Advice on Rear Differential Leak for 1980 C10
Replies
5
Views
356
AlabamaDan
A
A
1980 C10 Owner
2
Replies
20
Views
956
AlabamaDan
A
TheBigBlue2500
How many bolts hold the transmission on and where?
2
Replies
18
Views
874
GTX63
GTX63
F
Help with a possible transmission issue
2
Replies
21
Views
2K
SquareRoot
SquareRoot
Gilmore
Transmission choices
Replies
0
Views
183
Gilmore
Gilmore

Latest posts

Forum statistics

Threads
44,419
Posts
957,232
Members
36,758
Latest member
PapaD
Top