LilRobert1367,
The two images show where the spring and the accelerator cable attach onto the valve cover.
if you look close the springs and the cable are not hooked up to the carb in one of the pics.
The two combined springs will pull the accelerator linkage back to the home position.
The larger cable is the accelerator. connected to the gas pedal.
The smaller cable is the detent for the transmission.
Two cables two springs.
1979 is the last year for the square body, and the introduction to the intermediate head and manifold.
I am finding a lot of builders are capping the vacuum inlets on the carb. The only port they are leaving open is the hose from the distributor.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
