midwest
Full Access Member
- Joined
- Dec 28, 2021
- Posts
- 188
- Reaction score
- 203
- Location
- Indiana
- First Name
- Scott
- Truck Year
- 1986
- Truck Model
- K20
- Engine Size
- 350
First off, I probably know and understand less about wiring than anyone on this board, LOL... I replaced all 4 headlights in my K 20 (it started life as a 77 but has an 86 body on it.). The headlights had been in it for 15 years and a couple were burnt out. I just went with stock replacements from the local Oreileys. The first night driving it the lights started to flicker on an off, all of them. If I hit the high beams to switch to those they come on and it stops flickering for a few minutes. Then they start flickering again and if I switch from high to low or low to high it stops the flickering for a few minutes then the same thing. I had to do this for about a 10 minute drive home...
I didn't make any other changes, so I didn't know if a loose connection somewhere would cause this or somewhere else I should look.
I didn't make any other changes, so I didn't know if a loose connection somewhere would cause this or somewhere else I should look.