What have you done to your square lately??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,439
Reaction score
28,345
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
ChuckN said:
Got to work on the valve seals. Then I discovered that for whatever reason (probably because they decided to stick with just o-rings on the exhaust valves) they didn’t machine down all of the valve seats for press-on seals. I could measure, but it wouldn’t make a difference. Some slid on, now I’m running into some that are damn near the same diameter of the seals themselves. No rhyme or reason.

Then I discovered I couldn’t find the Pioneer umbrella seals I have somewhere- probably ferreted away in the shop. I took it as a sign to walk away for the day.

I did get a chance to try this tool that worked awesome for getting spark plugs under tight headers. No more futzing around with an open end wrench with #5 and 6. Just gotta be gentle since there’s no rubber grommet to protect the porcelain.
You must be registered for see images attach

You must be registered for see images attach
Click to expand...

Between these few tools, no header will ever be in your way. Or steering shaft or whatever.

You must be registered for see images attach
 
JamesSam

JamesSam

Full Access Member
Joined
Feb 15, 2023
Posts
1,602
Reaction score
4,394
Location
VA
First Name
Sam
Truck Year
1987
Truck Model
Silverado V10
Engine Size
5.7 L 350 v8
Enjoyed the foliage during a ride down a two lane road out to Powhatan today. Dropped Kelley's Motovox bike with his cousin for a tune up.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 
Doppleganger

Doppleganger

Full Access Member
Joined
May 24, 2019
Posts
12,705
Reaction score
58,940
Location
OH-MI: Just like it sounds
First Name
Chris
Truck Year
1985
Truck Model
K20
Engine Size
5.7
Cleaned up all the new welds, then used a 2K seam sealer and finished redoing all the old, including (and especially) inside the cowl, then primered the bottom and another coat of primer on everything. Officially done til Spring. :hat:
You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 
DoubleDingo

DoubleDingo

Full Access Member
Joined
Jul 3, 2012
Posts
11,250
Reaction score
17,176
Location
Right where I am
First Name
Bagoomba
Truck Year
1981
Truck Model
81-C20 Silverado Camper Special-TH400-4.10s
Engine Size
Carb'ed Vortec 350
ChuckN said:
Got to work on the valve seals. Then I discovered that for whatever reason (probably because they decided to stick with just o-rings on the exhaust valves) they didn’t machine down all of the valve seats for press-on seals. I could measure, but it wouldn’t make a difference. Some slid on, now I’m running into some that are damn near the same diameter of the seals themselves. No rhyme or reason.

Then I discovered I couldn’t find the Pioneer umbrella seals I have somewhere- probably ferreted away in the shop. I took it as a sign to walk away for the day.

I did get a chance to try this tool that worked awesome for getting spark plugs under tight headers. No more futzing around with an open end wrench with #5 and 6. Just gotta be gentle since there’s no rubber grommet to protect the porcelain.
You must be registered for see images attach

You must be registered for see images attach
Click to expand...
I take the rubber out of my spark plug sockets as soon as I get them. Have broke too many plugs (1 back in 1986) with the rubber in the socket. Haven't damaged a spark plug since that fateful day in 86
 
JamesSam

JamesSam

Full Access Member
Joined
Feb 15, 2023
Posts
1,602
Reaction score
4,394
Location
VA
First Name
Sam
Truck Year
1987
Truck Model
Silverado V10
Engine Size
5.7 L 350 v8
Have been driving it a couple times a week, as I have posted, even with the leaky rad. Driving it for distances of 20 miles here and there and the rad stays full even with the leak. I also have been topping off the reserve when it gets low. My driveway is not level on the spots we park. Possibly leaking due to topping off too much? Or likely I have a leak minimal enough to not hinder here and there driving? Starting to think maybe I top off too much.
 
JamesSam

JamesSam

Full Access Member
Joined
Feb 15, 2023
Posts
1,602
Reaction score
4,394
Location
VA
First Name
Sam
Truck Year
1987
Truck Model
Silverado V10
Engine Size
5.7 L 350 v8
JamesSam said:
Have been driving it a couple times a week, as I have posted, even with the leaky rad. Driving it for distances of 20 miles here and there and the rad stays full even with the leak. I also have been topping off the reserve when it gets low. My driveway is not level on the spots we park. Possibly leaking due to topping off too much? Or likely I have a leak minimal enough to not hinder here and there driving? Starting to think maybe I top off too much.
Click to expand...
Replacing the radiator would make me feel better but does anyone have any other input? Truck stays cool and I want to drive it....
 
Travlr

Travlr

Full Access Member
Joined
Sep 18, 2023
Posts
234
Reaction score
767
Location
Central Utah
First Name
C
Truck Year
1978
Truck Model
K20 Camper Special
Engine Size
350
JamesSam said:
Replacing the radiator would make me feel better but does anyone have any other input? Truck stays cool and I want to drive it....
Click to expand...

Do you have an overflow bottle/expansion tank on it? If not, I'd put one on and monitor the coolant there. You might find it fluctuates by the warmth in the engine.
 
JamesSam

JamesSam

Full Access Member
Joined
Feb 15, 2023
Posts
1,602
Reaction score
4,394
Location
VA
First Name
Sam
Truck Year
1987
Truck Model
Silverado V10
Engine Size
5.7 L 350 v8
Travlr said:
Do you have an overflow bottle/expansion tank on it? If not, I'd put one on and monitor the coolant there. You might find it fluctuates by the warmth in the engine.
Click to expand...
Yes, there is an overflow tank and I always monitor it. Ever since I have bought the truck it gets below the fill line for the reserve periodically, so I have reactively always refilled it.
 
Ajax19

Ajax19

Full Access Member
Joined
May 11, 2022
Posts
254
Reaction score
923
Location
Socal
First Name
Ajax
Truck Year
1983
Truck Model
K3500
Engine Size
454
JamesSam said:
Have been driving it a couple times a week, as I have posted, even with the leaky rad. Driving it for distances of 20 miles here and there and the rad stays full even with the leak. I also have been topping off the reserve when it gets low. My driveway is not level on the spots we park. Possibly leaking due to topping off too much? Or likely I have a leak minimal enough to not hinder here and there driving? Starting to think maybe I top off too much.
Click to expand...
Always wanted to know if this works to Crack a egg in there and send it
 
ChuckN

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,314
Reaction score
3,996
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
JamesSam said:
Replacing the radiator would make me feel better but does anyone have any other input? Truck stays cool and I want to drive it....
Click to expand...
IMHO, man, you’ve been battling this thing for a while now. It’s likely going to get worse at some point, I’d just be done with it and replace it, but that’s just how I roll. You do you.:cool:
 
TotalyHucked

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
3,671
Reaction score
11,855
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
JamesSam said:
Replacing the radiator would make me feel better but does anyone have any other input? Truck stays cool and I want to drive it....
Click to expand...
Do you know for sure that it's the rad? If not, you need to find the source of the leak first
 
JamesSam

JamesSam

Full Access Member
Joined
Feb 15, 2023
Posts
1,602
Reaction score
4,394
Location
VA
First Name
Sam
Truck Year
1987
Truck Model
Silverado V10
Engine Size
5.7 L 350 v8
Ajax19 said:
Always wanted to know if this works to Crack a egg in there and send it
Click to expand...

ChuckN said:
IMHO, man, you’ve been battling this thing for a while now. It’s likely going to get worse at some point, I’d just be done with it and replace it, but that’s just how I roll. You do you.:cool:
Click to expand...

TotalyHucked said:
Do you know for sure that it's the rad? If not, you need to find the source of the leak first
Click to expand...
Yep, I need to pull the trigger on this one. Especially since I will likely be handing it over to the garage to replace the AC compressor next. Thanks for the motivation fellas.
 
You must log in or register to reply here.

Similar threads

Strick
What I have done to my Square lately…
Replies
1
Views
223
Strick
Strick
S
Oops. Probably shouldn't have done that.
Replies
11
Views
2K
dsteelejr
dsteelejr
Randy and Easton
  • Sticky
Easton Is Graduating Thank You all for your help GMSB!!
2 3
Replies
31
Views
4K
Randy and Easton
Randy and Easton
D
Thank you post to y'all.
Replies
3
Views
1K
Catbox
Catbox
RanchWelder
Identifying GM Transfer Cases: Show us in pictures what you have with measurments and Adapters.
2
Replies
19
Views
5K
dragstews
dragstews

Latest posts

Forum statistics

Threads
44,162
Posts
950,639
Members
36,275
Latest member
2manysquares2care
Top