Loose steering,is this normal

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bradsterk3500

Junior Member
Joined
Mar 12, 2022
Posts
9
Reaction score
18
Location
Ontario
First Name
Brad
Truck Year
1990
Truck Model
K3500
Engine Size
400
Just wondering. My 1990 Sierra v3500 has some play, maybe typical?
Any way to tighten up m
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,192
Reaction score
8,030
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
Replace all wear items in the front suspension. Convert the steering shaft to the Jeep type and lose the rag joint in the process. Make sure frame isn't cracked where the steering box mounts. Set toe to 1/16th inch toe IN. Carry on.
 

Keith Seymore

Full Access Member
Joined
Jul 13, 2015
Posts
2,875
Reaction score
9,138
Location
Motor City
First Name
Keith Seymore
Truck Year
1987
Truck Model
R10
Engine Size
4.3L
They wander around a little bit.

Make sure your gear is adjusted. Should be 12 in lb preload, and 20 in lbs overcenter. The procedure is shown in the Unit Repair Manual.

Make sure the ball joints are good and not sticky. That can result in dartiness.

Run as much caster as you can tolerate. I have set them as high as 10 degrees.

Toe should be slightly in, like 1/16" to 1/8".

K
 

Bradsterk3500

Junior Member
Joined
Mar 12, 2022
Posts
9
Reaction score
18
Location
Ontario
First Name
Brad
Truck Year
1990
Truck Model
K3500
Engine Size
400
Awesome guys thanks so much. That's where I'll start.
 

Forum statistics

Threads
44,151
Posts
950,435
Members
36,268
Latest member
JUKA
Top