Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
fast 99
Full Access Member
- Joined
- Dec 31, 2021
- Posts
- 2,090
- Reaction score
- 3,065
- Location
- Spokane, Washington
- First Name
- Brian
- Truck Year
- 81,85
- Truck Model
- K20
- Engine Size
- 350
Using early manifolds lower ac bracket is a problem. This truck has those on it when I bought it. They can be made to work but requires modifications. Using an early 6 bolt manifold on the right side requires an adapter plate for the 7-bolt head. Mine always leaked, poor design. You will also need the TVS parts, AP brackets, pullies and correct vacuum routing. Pictures attached are my 85. Hard to show much with all the ancillary equipment. Finding parts that all work together may be difficult. Get any parts available use what you can. Took a couple years to locate the AP system for this truck. good luck
Attachments
- Joined
- Oct 30, 2019
- Posts
- 3,155
- Reaction score
- 7,324
- Location
- Downingtown, PA
- First Name
- Wayne
- Truck Year
- 1974
- Truck Model
- Jimmy
- Engine Size
- 350
What Brian is explaining to you, is the 1985 exhaust manifolds are slightly different then 1973 manifolds Mike has shown you. Does your husband's truck still have the original 1985 exhaust manifolds with the AIR pump tube fittings? Hard to see in your photo.
hoagster
Full Access Member
- Joined
- May 16, 2017
- Posts
- 1,409
- Reaction score
- 3,464
- Location
- California
- First Name
- Mike
- Truck Year
- 1973, 2000
- Truck Model
- K10, 1500
- Engine Size
- 5.3l
I found a picture that may help you decide!
let me know, it may still work with different brackets on your truck.
You must be registered for see images attach
let me know, it may still work with different brackets on your truck.
hoagster
Full Access Member
- Joined
- May 16, 2017
- Posts
- 1,409
- Reaction score
- 3,464
- Location
- California
- First Name
- Mike
- Truck Year
- 1973, 2000
- Truck Model
- K10, 1500
- Engine Size
- 5.3l
here's one more so you can see the brackets
You must be registered for see images attach
Old60Driver
1983 K20 Silverado
- Joined
- May 17, 2020
- Posts
- 245
- Reaction score
- 306
- Location
- Houston
- First Name
- Michael
- Truck Year
- 1983
- Truck Model
- K20 Silverado
- Engine Size
- 350
Sorry for coming back to the party late (got sent out of town for work). I just went through the garage, and I couldn't find it. I can't imagine I threw it out, so it must be in my storage unit. I'll try to get over today and check, but I think it's going to look just like the '85
hoagster
Full Access Member
- Joined
- May 16, 2017
- Posts
- 1,409
- Reaction score
- 3,464
- Location
- California
- First Name
- Mike
- Truck Year
- 1973, 2000
- Truck Model
- K10, 1500
- Engine Size
- 5.3l
So here's what I found for you and I txt'd some of it. But here's some images. This is the pump I have part number 7817872
Depending on your connections to the exhaust manifolds you may need one of these
The tubes coming out of the face are the difference. the actual pump part number for these 2 is 7849320
hope this helps
You must be registered for see images attach
Depending on your connections to the exhaust manifolds you may need one of these
You must be registered for see images attach
The tubes coming out of the face are the difference. the actual pump part number for these 2 is 7849320
hope this helps
hoagster
Full Access Member
- Joined
- May 16, 2017
- Posts
- 1,409
- Reaction score
- 3,464
- Location
- California
- First Name
- Mike
- Truck Year
- 1973, 2000
- Truck Model
- K10, 1500
- Engine Size
- 5.3l
Got that off of NAPA
hoagster
Full Access Member
- Joined
- May 16, 2017
- Posts
- 1,409
- Reaction score
- 3,464
- Location
- California
- First Name
- Mike
- Truck Year
- 1973, 2000
- Truck Model
- K10, 1500
- Engine Size
- 5.3l
I found this on craigslist also, but it is the same setup as mine but it is complete!
You must be registered for see images attach
- Joined
- Aug 9, 2020
- Posts
- 81
- Reaction score
- 89
- Location
- US
- First Name
- Mike
- Truck Year
- 1983
- Truck Model
- K20 Suburban
- Engine Size
- 350
I got mine on ebay- see https://www.ebay.com/sch/i.html?_from=R40&_nkw=smog+pump&_sacat=0&rt=nc&Brand=GM&_dcat=33610
- Joined
- Jan 11, 2022
- Posts
- 62
- Reaction score
- 113
- Location
- San Jose, CA
- First Name
- Rob
- Truck Year
- 1976
- Truck Model
- K20
- Engine Size
- 400
For my 1976 K20, I had RockAuto rebuild mine. The advantage of rebuilding yours is you know it fits. I think I also got the diverter valve from Rock Auto.
There is also a rebuilder on eBay. Seller's name is "BZ Rebuilders".
There is also a rebuilder on eBay. Seller's name is "BZ Rebuilders".
Similar threads
