Air Cleaner Stud

VPC20HD · Oct 5, 2024

Hello,

I have a tall air cleaner for my 82 C20 and obviously I need the Stud to hold it in place.

I found this 8.5 inch Stud but it's $40, plus the shipping is $21 for some reason.

https://hammondmotorsports.com/air-cleaner-stud-kit-extra-long-8-5/

$61 for an air cleaner stud... I'll pay it if I have to but is there a better option?

Thank You

nvrenuf · Oct 5, 2024

Go your local Autozone, et al and see if they have any all thread / threaded rod. Stores used to keep this in stock in various lengths.

Also, check Home Depot or Lowes.

Most carbs use 1/4-20.

PrairieDrifter · Oct 5, 2024

You can also get bare 1/4 rod. Then just cut threads on each end.

HotWheelsBurban · Oct 5, 2024

VPC20HD said:
Hello,

I have a tall air cleaner for my 82 C20 and obviously I need the Stud to hold it in place.

I found this 8.5 inch Stud but it's $40, plus the shipping is $21 for some reason.

https://hammondmotorsports.com/air-cleaner-stud-kit-extra-long-8-5/

$61 for an air cleaner stud... I'll pay it if I have to but is there a better option?

Thank You

Man even NOS or stainless steel should be cheaper than that....1/4-20 threaded rod, usually comes in a foot long stick, just cut to measure.

mlsceo · Oct 5, 2024

Ace hardware

Rusty Nail · Oct 5, 2024

Ill sell you mine -out of the truck-for half that.
Holla atcha boi!
:headbang:

$30 ~ pst

84GMCSierra · Oct 7, 2024

As mentioned above and as I've done. Threaded rod. Measure, ad nuts to each end, cut to length, round/smooth the ends then use the nuts to clean the threads and your good to go.

WFarm · Oct 7, 2024

Threaded rod works, but I picked this up at O'Reilly's because I also wanted that over-sized stamped wing nut.

You must be registered for see images attach

Johnny Atomic · Oct 7, 2024

I ordered this threaded rod from Amazon when I changed from short air cleaner to tall air clean lid.

https://www.amazon.com/gp/product/B0CZJGNM9G/

Orion · Oct 9, 2024

Johnny Atomic said:
I ordered this threaded rod from Amazon when I changed from short air cleaner to tall air clean lid.

https://www.amazon.com/gp/product/B0CZJGNM9G/

Ah the ol' 5HP Briggs and Stratton. Terrifying power. :rotflmao:

Ken B · Oct 9, 2024

surfing thru here you find parts #s faster than some of the parts houses....WFarm thanks. was thinking about that rod and poof you already had the part #.
thanks

SquareRoot · Oct 9, 2024

My ex had no problem paying $40 for an 8.5" stud. Bi atch!

Johnny Atomic · Oct 14, 2024

Orion said:
Ah the ol' 5HP Briggs and Stratton. Terrifying power.

Only because no one is making an Air cleaner sticker that says "Tree Fiddy"

Air Cleaner Stud

VPC20HD

Junior Member

nvrenuf

Full Access Member

PrairieDrifter

Full Access Member

HotWheelsBurban

Full Access Member

mlsceo

Full Access Member

Rusty Nail

Full Access Member

84GMCSierra

Full Access Member

WFarm

Full Access Member

Johnny Atomic

Full Access Member

Attachments

Orion

Junior Member

Ken B

Full Access Member

SquareRoot

Full Access Member

Johnny Atomic

Full Access Member

Similar threads

Latest posts

Forum statistics