Aux battery for audio

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

1

1987R30

Junior Member
Joined
Jun 8, 2024
Posts
14
Reaction score
10
Location
melbourne, fl
First Name
slash
Truck Year
1987
Truck Model
R30
Engine Size
7.4l
Grit dog said:
^Has to be as big as the + wire.
Or no worky and you fry stuff.
10ga off of any automotive size battery is merely an accessory load.
10ga for a ground is just silly.
Click to expand...
It's the factory ground. I don't work around wire enough to be able to tell the size by looking at it. It may be #8. Regardless, it is an accessory load. I plan to only run my new audio system (Radio and two amplifiers) off the aux battery.

I got my replacement relay from Rockauto. It is a hefty part. However, I couldnt install it due to coming down with a head cold. Also,, We're dealing with some weather issues here in Florida.
 
Snoots

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,728
Reaction score
18,091
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
2 AWG welding cable works very well.
 
SquareRoot

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,191
Reaction score
8,023
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
Grit dog said:
Just pick what kind of isolator combiner you like.
Click to expand...
:confused:
  • Almost exactly.
  • Awfully good.
  • Deafening silence.
  • Freezer Burn.
  • Living dead.
  • Loyal opposition.
  • Old news.
  • Only choice.
 
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,963
Reaction score
12,211
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
1987R30 said:
It's the factory ground. I don't work around wire enough to be able to tell the size by looking at it. It may be #8. Regardless, it is an accessory load. I plan to only run my new audio system (Radio and two amplifiers) off the aux battery.

I got my replacement relay from Rockauto. It is a hefty part. However, I couldnt install it due to coming down with a head cold. Also,, We're dealing with some weather issues here in Florida.
Click to expand...
Ok, fair enough. Suffice it to say an 8ga ground for a battery that size running 2 amplifiers is way undersized.
But seems like the experts here who haven’t provided any meaningful input think the good advice you’re getting is dumb. So maybe they could help you….
 
SquareRoot

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,191
Reaction score
8,023
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
What are you trying to accomplish by installing a second battery? IF it's just for the purpose of running two amps, why do you think you need two batteries? I'm just probing you on your knowledge of audio equipment. I have put together probably over 200 systems over the years and I know a bit about them. Not everything, but enough. Can you post what amps you are using?
 

Attachments

  • IMG_20210310_183212398.jpg
    IMG_20210310_183212398.jpg
    196.5 KB · Views: 14
  • IMG_20210401_175753216.jpg
    IMG_20210401_175753216.jpg
    184.9 KB · Views: 16
  • IMG_20210401_175730858.jpg
    IMG_20210401_175730858.jpg
    186.6 KB · Views: 14
  • IMG_20210401_175806818.jpg
    IMG_20210401_175806818.jpg
    148 KB · Views: 15
  • IMG_20210127_192814378.jpg
    IMG_20210127_192814378.jpg
    117.8 KB · Views: 13
Grit dog

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,963
Reaction score
12,211
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
SquareRoot said:
What are you trying to accomplish by installing a second battery? IF it's just for the purpose of running two amps, why do you think you need two batteries? I'm just probing you on your knowledge of audio equipment. I have put together probably over 200 systems over the years and I know a bit about them. Not everything, but enough. Can you post what amps you are using?
Click to expand...
First post. 1100W (yes not specific peak or rms and @ what impedance….probably another funny word to @Rusty Nail.)
Also first post, he has a truck that came with a dual battery setup it appears.
But correct, hasn’t answered “why” 2 batteries are needed. We need to get past 8ga battery grounds first. However it’s reasonable that 1100W of amplifier can or will draw more power than a 94 amp alternator is putting out on average. Hence a great reason for some additional reserve capacity.
 
SquareRoot

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,191
Reaction score
8,023
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
That's what happens when one jumps to the latest post. A good battery and alternator will suffice for 99% of any system one could put in a Squarebody unless your a nutcake and have blow thru subs in the bed. Now if the second battery was intended for other accessories that might be used in a camper type scenario, I could understand the hassle and expense of a dual battery setup.

I'm pushing 1900 RMS watts like it doesn't know it's there. PowerMaster 150 amp alt, 4 gauge charging wire (welding cable) and 1 gauge feed cable to the amps. It might sound like overkill but it's a once and done with room for increased capacity (wicked me has some idears). To each their own but be aware of those Rabbit Holes.
 

Attachments

  • IMG_20241008_090908484.jpg
    IMG_20241008_090908484.jpg
    125.9 KB · Views: 13
  • IMG_20241008_090919866.jpg
    IMG_20241008_090919866.jpg
    134 KB · Views: 14
  • IMG_20241008_090937299.jpg
    IMG_20241008_090937299.jpg
    113.7 KB · Views: 14
Y

YakkoWarner

Full Access Member
Joined
May 29, 2024
Posts
162
Reaction score
187
Location
Central Texas
First Name
Wolf
Truck Year
1989
Truck Model
R2500 Suburban
Engine Size
454
SquareRoot said:
That's what happens when one jumps to the latest post. A good battery and alternator will suffice for 99% of any system one could put in a Squarebody unless your a nutcake and have blow thru subs in the bed. Now if the second battery was intended for other accessories that might be used in a camper type scenario, I could understand the hassle and expense of a dual battery setup.

I'm pushing 1900 RMS watts like it doesn't know it's there. PowerMaster 150 amp alt, 4 gauge charging wire (welding cable) and 1 gauge feed cable to the amps. It might sound like overkill but it's a once and done with room for increased capacity (wicked me has some idears). To each their own but be aware of those Rabbit Holes.
Click to expand...

My impression was that he wants to run dual batteries not because the main battery/alternator is inadequate, but rather for the ability to run the audio for extended time periods without leaving the truck running or risking depleting the main battery to where engine start fails. I can see the appeal to that if you are often in a position where you want the music to be playing but don't want to be running the engine constantly...in that regard to becomes more like a traditional camper load but instead of lights and fans, its music.
 
1

1987R30

Junior Member
Joined
Jun 8, 2024
Posts
14
Reaction score
10
Location
melbourne, fl
First Name
slash
Truck Year
1987
Truck Model
R30
Engine Size
7.4l
Grit dog said:
First post. 1100W (yes not specific peak or rms and @ what impedance….probably another funny word to @Rusty Nail.)
Click to expand...

1100 WRMS.

The DVC subs will be wired in parallel for a combined resistance of 1 ohm. Still working on how I want to set up the other speakers. The subs are on their own amplifier.

Grit dog said:
Also first post, he has a truck that came with a dual battery setup it appears.
But correct, hasn’t answered “why” 2 batteries are needed. We need to get past 8ga battery grounds first. However it’s reasonable that 1100W of amplifier can or will draw more power than a 94 amp alternator is putting out on average. Hence a great reason for some additional reserve capacity.
Click to expand...

1100/14.4 = 76.4 amps (just for the amplifiers)

My charging system is rock solid.
I don't want to swap the alternator to 140 Amp and put everything on a single battery
It's easier and more cost efficient to add the aux battery ($100) then to install a 140 amp alternator ($250)

My original post wasn't clear. I've already decided to add the aux battery. I was asking where I would physically connect the amplifiers to the aux battery. I guess I go through the firewall and connect directly to the Aux Battery terminals.
 
1lejohn

1lejohn

Full Access Member
Joined
May 14, 2012
Posts
325
Reaction score
748
Location
texas
First Name
john
Truck Year
1985 , 2004
Truck Model
k-1500, 2500 HD
Engine Size
350, 6.7
SquareRoot said:
That's what happens when one jumps to the latest post. A good battery and alternator will suffice for 99% of any system one could put in a Squarebody unless your a nutcake and have blow thru subs in the bed. Now if the second battery was intended for other accessories that might be used in a camper type scenario, I could understand the hassle and expense of a dual battery setup.

I'm pushing 1900 RMS watts like it doesn't know it's there. PowerMaster 150 amp alt, 4 gauge charging wire (welding cable) and 1 gauge feed cable to the amps. It might sound like overkill but it's a once and done with room for increased capacity (wicked me has some idears). To each their own but be aware of those Rabbit Holes.
Click to expand...
Thats a good electrical system you have there, but how does it do if the truck isn't running? How long will your only battery last , and still start the truck? Just saying.
 
1

1987R30

Junior Member
Joined
Jun 8, 2024
Posts
14
Reaction score
10
Location
melbourne, fl
First Name
slash
Truck Year
1987
Truck Model
R30
Engine Size
7.4l
SquareRoot said:
That's what happens when one jumps to the latest post. A good battery and alternator will suffice for 99% of any system one could put in a Squarebody unless your a nutcake and have blow thru subs in the bed. Now if the second battery was intended for other accessories that might be used in a camper type scenario, I could understand the hassle and expense of a dual battery setup.

I'm pushing 1900 RMS watts like it doesn't know it's there. PowerMaster 150 amp alt, 4 gauge charging wire (welding cable) and 1 gauge feed cable to the amps. It might sound like overkill but it's a once and done with room for increased capacity (wicked me has some idears). To each their own but be aware of those Rabbit Holes.
Click to expand...
My installer had the same recommendation: update the alternator for most non-competition applications is all I needed. However, my existing alternator is strong, and it's cheaper to install the aux battery then to replace the alternator. And I can run the audio without running the engine.
 
1

1987R30

Junior Member
Joined
Jun 8, 2024
Posts
14
Reaction score
10
Location
melbourne, fl
First Name
slash
Truck Year
1987
Truck Model
R30
Engine Size
7.4l
YakkoWarner said:
My impression was that he wants to run dual batteries not because the main battery/alternator is inadequate, but rather for the ability to run the audio for extended time periods without leaving the truck running or risking depleting the main battery to where engine start fails. I can see the appeal to that if you are often in a position where you want the music to be playing but don't want to be running the engine constantly...in that regard to becomes more like a traditional camper load but instead of lights and fans, its music.
Click to expand...
yes and no. My alt is a factory unit pushing 94 amps. However, at 1100 WRMS, that's 76.4 amps just for the amplifiers. But yes, I may want to run the audio without the engine running and still be able to start my truck when ready. and Yes, it is a traditional camper load but not lights and fans....thumping music.
 
SquareRoot

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,191
Reaction score
8,023
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
1lejohn said:
Thats a good electrical system you have there, but how does it do if the truck isn't running? How long will your only battery last , and still start the truck? Just saying.
Click to expand...
I don't know because I'm not one to crank the system with the truck not running. It sounds better at 14.2 volts than at 12 anyway.
 
1

1987R30

Junior Member
Joined
Jun 8, 2024
Posts
14
Reaction score
10
Location
melbourne, fl
First Name
slash
Truck Year
1987
Truck Model
R30
Engine Size
7.4l
1lejohn said:
Thats a good electrical system you have there, but how does it do if the truck isn't running? How long will your only battery last , and still start the truck? Just saying.
Click to expand...
This is the purpose of the aux in a camper setup. I'm simply not doing a camper. I'm doing music. This is a problem not addressed with a single battery.
 
You must log in or register to reply here.

Similar threads

hey mister
Aux Battery Tray local
2 3
Replies
33
Views
2K
KCKKen
K
hey mister
Battery / charging isolator.
Replies
7
Views
727
wingman50
wingman50
RanchWelder
Multiple Battery types and the danger of diode damage with modern batteries mixed with Lead Acid and OEM alternators.
2
Replies
23
Views
2K
Ricko1966
R
creich68
91 Burban Radio Restoration - Static Gone!
Replies
5
Views
2K
Craig Nedrow
Craig Nedrow
Conejo_K10
Aux Battery Tray
2
Replies
28
Views
8K
AuroraGirl
AuroraGirl

Latest posts

Forum statistics

Threads
44,131
Posts
949,960
Members
36,232
Latest member
dljohnson55
Top