Finally, a squarebody forum!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bucket

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,650
Reaction score
28,975
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
BoxT86 said:
I went to autozone and oreilley today and neither could find any for me. The guy at oreiily said he just uses bolts through from the fan clutch.. :banghead:
Click to expand...

Howdy from Ohio!

There are usually stud kits in the Help!/Dorman area. Also, many hardware stores like Ace stock hardened automotive type studs. They should be 3/8", fine thread from what I recall. Or maybe 5/16"... I'm having a brain fart right now.

What part of Illinois? A member here @Kim Burke told me about a great radiator shop in the Danville area, but I've never been there yet.
 
BoxT86

BoxT86

Junior Member
Joined
Sep 26, 2024
Posts
8
Reaction score
18
Location
Earth
First Name
Chris
Truck Year
1986
Truck Model
K20
Engine Size
SB 400
bucket said:
What part of Illinois? A member here @Kim Burke told me about a great radiator shop in the Danville area, but I've never been there yet.
Click to expand...
Central, we've got a good one over in Springfield too, a-z radiator. They worked on radiators when I was a kid, took a radiator from my old 64 massey to them a few years ago after I drove a stake through it. They told me next time use the bucket instead of the radiator.. i agreed. I'm taking this radiator I found in the bed to them next week, they'll get it right.
 
legopnuematic

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
2,633
Reaction score
6,957
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
Welcome from Missouri.
 
Mr Clean

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,385
Reaction score
10,536
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
:welcome:
 
ChuckN

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
1,397
Reaction score
4,399
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
BoxT86 said:
Central, we've got a good one over in Springfield too, a-z radiator. They worked on radiators when I was a kid, took a radiator from my old 64 massey to them a few years ago after I drove a stake through it. They told me next time use the bucket instead of the radiator.. i agreed. I'm taking this radiator I found in the bed to them next week, they'll get it right.
Click to expand...
Welcome! Maybe bring them a box of donuts, those shops aren’t as easy to come by as they used to be.

Nice truck!
 
86 C10 Shortbed

86 C10 Shortbed

Full Access Member
Joined
Jul 19, 2016
Posts
120
Reaction score
135
Location
Ohio
First Name
Mark
Truck Year
1986
Truck Model
C10
Engine Size
5.3L
Welcome from Central Ohio
 
dhartman

dhartman

Full Access Member
Joined
Jan 18, 2024
Posts
132
Reaction score
464
Location
michigan
First Name
daniel
Truck Year
1980
Truck Model
c15
Engine Size
350
Welcome from Michigan.

I can talk first hand about the project with the kiddo. My son and I doing that right now with his truck. From the pics looks like you have a great starting point.

1 piece of advice take it slow and enjoy the ride. Trying to move to fast you make dumb mistakes.

There is a "under construction " thread that you can post about you progress. Look forward to seeing you build up and eventually the restore.
 
F

Fr8dog

Junior Member
Joined
Oct 5, 2024
Posts
10
Reaction score
16
Location
Utah
First Name
Jeffrey
Truck Year
1987
Truck Model
V3500
Engine Size
350
AuroraGirl

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,702
Reaction score
6,887
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
BoxT86 said:
Hey, Chris in Illinois here. Well, it appears this forum has been here a while but I just found it.

I picked up :D an 86 K20 a few years ago. I'm finally getting started on getting it going. The kid I bought it from was mid process swapping the diesel for a SB 400. It's basically a short block so I've been trying to get parts to finish out the engine.

So, there's a newish water pump on it with no studs, so I need to find those.

I already installed a new alternator. I have a new power steering pump and hoses. They arrived yesterday, I'm hoping my ebay bracket will fit the small block and ps pump with reservoir and hydro boost.

I still need to take the, what I assume to be, original radiator laying in the bed in to a shop for cleanup and repair if needed. Also, i have the fan and clutch that I assume is from the diesel. I'm not sure. I also don't know if I can use the fan and clutch from the diesel on the small block...

Lots to do, but worth it. The body isn't great but not terrible either. The goal is to get it up and running enough to make a few off-roading memories with my son, then hopefully restore it with him to be his when he's old enough.

I'm looking forward to learning a lot here from folks that have already done all this and hopefully will not repeat all the mistakes already documented here, along my way.
Click to expand...
id check that your pulley's are not close to rotting away, they are thin and if the grooves are worn or the metal is rustying badly, the belts will get cut up from them as they wear more. And your outer pulley can come off its for an AIR pump.

the fuel pump you should make into an edelbrock so you have the right fuel pressure. Unless you have a lot of debris in the tank you should not use a filter inline the fuel supply
 
BoxT86

BoxT86

Junior Member
Joined
Sep 26, 2024
Posts
8
Reaction score
18
Location
Earth
First Name
Chris
Truck Year
1986
Truck Model
K20
Engine Size
SB 400
AuroraGirl said:
id check that your pulley's are not close to rotting away, they are thin and if the grooves are worn or the metal is rustying badly, the belts will get cut up from them as they wear more. And your outer pulley can come off its for an AIR pump.

the fuel pump you should make into an edelbrock so you have the right fuel pressure. Unless you have a lot of debris in the tank you should not use a filter inline the fuel supply
Click to expand...
Thanks, it looks like there is an aftermarket chrome fuel pump on there now, I'll have to checkout what it is and make sure it can provide enough pressure. I do intend to drop the fuel tanks for inspection before using them. I hope at least one of them is clean enough to use. Also, i am unsure if there is a sending unit in those and what I may have to do to make sure it works with the new sb400.

Luckily, the pulleys have some surface rust but are pretty good, a wire brush cleaned up most of it already. I was told the engine came out of an wrecked or abandoned late 70's RV that only had 36k miles on it.
 
You must log in or register to reply here.

Similar threads

Chris64
I finally got my hands on a squarebody!
2
Replies
15
Views
720
ChuckN
ChuckN
LJ69
I finally got me a squarebody
2
Replies
22
Views
2K
LJ69
LJ69
Truck82
New to forum
Replies
8
Views
323
legopnuematic
legopnuematic
S
New to the forum Everybody
Replies
12
Views
571
Terry Wilkerson
Terry Wilkerson
K
New to the forum
Replies
14
Views
507
86 C10 Shortbed
86 C10 Shortbed

Latest posts

Forum statistics

Threads
44,440
Posts
958,037
Members
36,811
Latest member
patchy0990
Top