molus
Member
- Joined
- Jul 12, 2023
- Posts
- 46
- Reaction score
- 97
- Location
- new zealand
- First Name
- morgan
- Truck Year
- 1983
- Truck Model
- k20
- Engine Size
- 5.7
GVW
- Thread starter molus
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Oct 27, 2016
- Posts
- 2,466
- Reaction score
- 6,299
- Location
- MO
- First Name
- Spencer
- Truck Year
- 1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
- Truck Model
- Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
- Engine Size
- 225/6, 350 c.i., 350 c.i., 5.9l Cummins
The vin plates went away in 1979, when the VIN moved to the dash for the 1979 model year, just containing the VIN and continued up there until present day pretty much.
So an 83 should have this on the door-
So an 83 should have this on the door-
You must be registered for see images attach
Keith Seymore
Full Access Member
- Joined
- Jul 13, 2015
- Posts
- 2,867
- Reaction score
- 9,126
- Location
- Motor City
- First Name
- Keith Seymore
- Truck Year
- 1987
- Truck Model
- R10
- Engine Size
- 4.3L
It's either 6600 (base) or 8600 with RPO C6P.
www.gm.com/content/dam/company/no_search/heritage-archive-docs/vehicle-information-kits/chevrolet-trucks/1983-Chevrolet-Truck.pdf
Do you have the SPID label in the glovebox?
K
www.gm.com/content/dam/company/no_search/heritage-archive-docs/vehicle-information-kits/chevrolet-trucks/1983-Chevrolet-Truck.pdf
Do you have the SPID label in the glovebox?
K
You must be registered for see images attach
molus
Member
- Joined
- Jul 12, 2023
- Posts
- 46
- Reaction score
- 97
- Location
- new zealand
- First Name
- morgan
- Truck Year
- 1983
- Truck Model
- k20
- Engine Size
- 5.7
My doors have been replaced at some stage unfortunately. There is nothing there.
fast 99
Full Access Member
- Joined
- Dec 31, 2021
- Posts
- 2,012
- Reaction score
- 2,903
- Location
- Spokane, Washington
- First Name
- Brian
- Truck Year
- 81,85
- Truck Model
- K20
- Engine Size
- 350
I believe the GVW is coded in the VIN.
75gmck25
Full Access Member
- Joined
- Oct 13, 2016
- Posts
- 2,254
- Reaction score
- 2,194
- Location
- Northern Virginia
- First Name
- Bruce
- Truck Year
- 1975
- Truck Model
- K25 Camper Special TH350 NP203
- Engine Size
- 5.7
If you look through the GM document posted, you will be able to get an idea of what you have.
Standard K20 (6000 GVW) should have 5 leaf rear springs, 3.23 ratio axle standard, and will have load range C or D tires
C6P option (8600 GVW) should have 8 leaf rear springs, usually 3 leaf front springs, 4.10 ratio axle standard, and it should have load range D or E tires (most likely E)
Standard K20 (6000 GVW) should have 5 leaf rear springs, 3.23 ratio axle standard, and will have load range C or D tires
C6P option (8600 GVW) should have 8 leaf rear springs, usually 3 leaf front springs, 4.10 ratio axle standard, and it should have load range D or E tires (most likely E)
molus
Member
- Joined
- Jul 12, 2023
- Posts
- 46
- Reaction score
- 97
- Location
- new zealand
- First Name
- morgan
- Truck Year
- 1983
- Truck Model
- k20
- Engine Size
- 5.7
This is the only thing I can find on the vehicle.
Attachments
molus
Member
- Joined
- Jul 12, 2023
- Posts
- 46
- Reaction score
- 97
- Location
- new zealand
- First Name
- morgan
- Truck Year
- 1983
- Truck Model
- k20
- Engine Size
- 5.7
Definitely have the C6p, the spare tyre was a 235/65/16. Larger drums and 56inch 8 leaf. 4.10 ratio.
Unfortunately I have to prove to the vehicle entry certifier in NZ what it is with some form of written identification.
Blue Ox
Turning Diesel Fuel Into Fun
- Joined
- Mar 27, 2018
- Posts
- 5,207
- Reaction score
- 11,986
- Location
- LI-NY
- First Name
- Derek
- Truck Year
- MCMLXXXV
- Truck Model
- K20HD
- Engine Size
- 6.2L
You should pay the GM Heritage Center a visit and download the data books for your truck.
If you wade through that you'll be able to decipher all the VIN, SPID and other documents for your specs and options.
If you wade through that you'll be able to decipher all the VIN, SPID and other documents for your specs and options.
Bextreme04
Full Access Member
- Joined
- May 13, 2019
- Posts
- 4,439
- Reaction score
- 5,575
- Location
- Oregon
- First Name
- Eric
- Truck Year
- 1980
- Truck Model
- K25
- Engine Size
- 350-4bbl
The only way to do that since everything is missing from the truck is to email the GM Heritage archive at [email protected] or fill out this form here: https://www.gm.com/content/public/us/en/gm/home/heritage/archive/archive-form.html
They will charge you $50 USD and then you will get emailed the original VIN sheet and original vehicle invoice that calls out all factory options and installed components from when it was originally produced and shipped to the first dealer or POS(point of sale). I got mine within about a week of sending in the filled out form.
Bextreme04
Full Access Member
- Joined
- May 13, 2019
- Posts
- 4,439
- Reaction score
- 5,575
- Location
- Oregon
- First Name
- Eric
- Truck Year
- 1980
- Truck Model
- K25
- Engine Size
- 350-4bbl
This is what they sent me when I sent in the request. Notice mine is a 1980 K25 with the 8600GVWR
Bextreme04
Full Access Member
- Joined
- May 13, 2019
- Posts
- 4,439
- Reaction score
- 5,575
- Location
- Oregon
- First Name
- Eric
- Truck Year
- 1980
- Truck Model
- K25
- Engine Size
- 350-4bbl
Mine was just old enough that C6P didn’t exist yet and the GVW isn’t in the VIN. GM made changes after 81 though and your invoice would include the C6P RPO and they will also send you a VIN decoder that will show you have the high GVWR, which is the “G” in the 4th VIN digit.
You must be registered for see images attach
Bextreme04
Full Access Member
- Joined
- May 13, 2019
- Posts
- 4,439
- Reaction score
- 5,575
- Location
- Oregon
- First Name
- Eric
- Truck Year
- 1980
- Truck Model
- K25
- Engine Size
- 350-4bbl
Also, the "M" code engine designation in the VIN means it was the high GVWR(over 8600lbs) that was the cutoff for heavy duty emissions in the US at the time. HD emissions meant that outside California it would not have EGR, smog pump, or catalytic converters installed.
molus
Member
- Joined
- Jul 12, 2023
- Posts
- 46
- Reaction score
- 97
- Location
- new zealand
- First Name
- morgan
- Truck Year
- 1983
- Truck Model
- k20
- Engine Size
- 5.7
I think I’ll do that. What was the options of payment. Could be a bit hard from the other side of the world.
75gmck25
Full Access Member
- Joined
- Oct 13, 2016
- Posts
- 2,254
- Reaction score
- 2,194
- Location
- Northern Virginia
- First Name
- Bruce
- Truck Year
- 1975
- Truck Model
- K25 Camper Special TH350 NP203
- Engine Size
- 5.7
Using Visa to pay is an easy way to pay for it in US$ and let your bank convert it to NZ$ for your account. I do it frequently the other way around when visiting GB (pounds) or Europe (euros).
I think Mastercard also works the same way.
In my experience, the bank conversion rate is usually a little better than what you would get if you went to one of the money exchanges in the airport.
I think Mastercard also works the same way.
In my experience, the bank conversion rate is usually a little better than what you would get if you went to one of the money exchanges in the airport.
Similar threads
Latest posts
-
-
-
-
-
Anyone else have this "Turbo Diesel" plaque?- Latest: TheBigBlue2500