Bell housing not fitting right?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

pmehringer001

pmehringer001

Junior Member
Joined
Mar 30, 2023
Posts
21
Reaction score
16
Location
Indiana
First Name
Paxton
Truck Year
1987
Truck Model
V20
Engine Size
350
I have a 6.5 diesel swapped into a squarebody and currently trying to install a sm465 behind it. I got the transmission from marketplace so not sure what year (was told it was 70’s) or what motor it was behind. I have a brand new flywheel and clutch all on the motor already and I went to put the bell housing on and it doesn’t quite line up. Very very close but looks like the bell housing doesn’t quite fit on both nubs and hitting the starter?? Are the bbc and sbc bell housing the same or am I missing something? Flywheel and clutch all came with the truck but I assume it’s the 11”, do I need the 10.5”?
 
PrairieDrifter

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,838
Reaction score
5,624
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
pmehringer001 said:
I have a 6.5 diesel swapped into a squarebody and currently trying to install a sm465 behind it. I got the transmission from marketplace so not sure what year (was told it was 70’s) or what motor it was behind. I have a brand new flywheel and clutch all on the motor already and I went to put the bell housing on and it doesn’t quite line up. Very very close but looks like the bell housing doesn’t quite fit on both nubs and hitting the starter?? Are the bbc and sbc bell housing the same or am I missing something? Flywheel and clutch all came with the truck but I assume it’s the 11”, do I need the 10.5”?
Click to expand...
They should be the same bellhousing but the transmission dowels on the 6.5 block may be bigger.
 
Rickf

Rickf

Full Access Member
Joined
Jul 29, 2017
Posts
570
Reaction score
711
Location
Grafton NH
First Name
Rick
Truck Year
1974, 1954 & a 1937
Truck Model
K20
Engine Size
350
The dowels are the same, I am not an expert but, I don't think a bellhousing for an 10.5" clutch will fit over an 11" clutch. Also, have you tried the fitment without the starter in place?
 
pmehringer001

pmehringer001

Junior Member
Joined
Mar 30, 2023
Posts
21
Reaction score
16
Location
Indiana
First Name
Paxton
Truck Year
1987
Truck Model
V20
Engine Size
350
Rickf said:
The dowels are the same, I am not an expert but, I don't think a bellhousing for an 10.5" clutch will fit over an 11" clutch. Also, have you tried the fitment without the starter in place?
Click to expand...
Yes I just tested it without the starter and it fit correctly. I ordered the power master 9052 starter for it
 
AuroraGirl

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,693
Reaction score
6,865
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
pmehringer001 said:
Yes I just tested it without the starter and it fit correctly. I ordered the power master 9052 start
Click to expand...
the trans originally had a z bar clutch, did you have a hydraulic setup to put on it? I see you said you had the bellhousing and all the stuff for it, just making sure they were hydraulic (for an 87) but if you have an earlier 80s, it may be z bar. zbar setup will need more parts if your truck wasnt a manual and putting them together correctly
 
pduffyd

pduffyd

Full Access Member
Joined
Sep 27, 2019
Posts
203
Reaction score
271
Location
Melbourne, Australia
First Name
Paul
Truck Year
1975
Truck Model
C20
Engine Size
454
Hi pmehringer001.
Here are a couple bellhouse part numbers for your 465.
They are for the 12" clutch or smaller you can see the bigger casing on the bottom for clearance of the clutch pressure plate and flywheel. There are 2 im showing you one for the Z bar. The other for the external hydraulic clutch cylinder.

You must be registered for see images attach

You must be registered for see images attach


You must be registered for see images attach


Both of these fit to my 454 mk iv, with no issues. Cant say for your 6.2 D.
My sm465 is from a 76 C20, not that there is any mounting differences over the years, only input shaft bearing size in the trans itself, which wont effect the bellhousing.
 
Last edited:
You must log in or register to reply here.

Similar threads

E
Need help with clutch fork alignment
Replies
0
Views
205
Ethan0
E
T
ls3 swap bell housing w/pictures
Replies
13
Views
1K
thecrow71
T
TommyGuns
Air Cleaner Fitting - PCV?
Replies
8
Views
453
TommyGuns
TommyGuns
84ScottsdaleSS
Tired of mechanic shop
Replies
2
Views
919
Big _Betsy_Red
Big _Betsy_Red
Steveoh
85 K20, TH400 to SM465 swap
Replies
0
Views
381
Steveoh
Steveoh

Latest posts

Forum statistics

Threads
44,068
Posts
948,744
Members
36,137
Latest member
maduwane
Top