Ricko1966's latest activity
-
RRotate the engine until the dots are lined up, remove the old chain WITHOUT moving the cam or crank. As long as you install the chain...
-
RRicko1966 reacted to Matt69olds's post in the thread What’s the best way to fix/clean up this wiring problem? with
Like.
Go to your nearest salvage yard, get a junction block from a newer truck. Run ONE large power cable from the battery to the junction... -
RI will give it a shot tomorrow and let you know how it goes. Thank you
-
RRicko1966 reacted to TotalyHucked's post in the thread Clamping brake lines to axle tubes? with Like.
I'd probably put a piece of fuel hose around it and zip tie it to the axle lol
-
RI use a Starrett 12" square blade and "calibrate" all my tape measures by bending the front hook tab. You can measure within .015 easy...
-
RBut clearly seeing they are out is a lot different than them actually being toed out. It happens very often, where people look at their...
-
RDon't ever let it slap back.
-
RRicko1966 reacted to bucket's post in the thread Problems with Fit on not one, but two new rear bumpers for 78 C10 fleetside with Like.
You also don't have the license plate pocket installed. That pocket actually adds a lot of rigidity to the center of the bumper. Loosen...
-
RNo doubt they won't move the pinion out. I'm guessing the yoke has been changed at some point with the wrong one to account for the gap...
-
RRicko1966 replied to the thread Rebuilding rear axle DIY?.Spider gears won't move the pinion yoke forward. When you start taking the diff apart heat the area at the cross shaft retainer...
-
RRicko1966 replied to the thread Problems with Fit on not one, but two new rear bumpers for 78 C10 fleetside.Does the bow come out with the bumper bracket bolts loose? As in do you maybe have tweaked frame rails or bumper brackets. If the bow...
-
RRicko1966 reacted to SirRobyn0's post in the thread What’s the best way to fix/clean up this wiring problem? with Like.
Well your going to get some opinions here for sure. Personally I don't mind the marine style battery terminals, though I prefer to get...
-
RRicko1966 reacted to SirRobyn0's post in the thread Differential swap / bought it, work and install now with Like.
Well this might all go in a direction I wasn't planning. So I looked at prices and for me to just slam gears in it. With an...
-
RRicko1966 replied to the thread Computerized carb.Okay I'm understanding more,so you put the correct replacement carb on,not a non ccc carb. I thought you already swapped and were trying...
-
RI use what is essentially a telescoping stick, and measure off of the inside of the sidewalls. I set it to the front of the tires and...
