Ricko1966's latest activity
-
RCode 12 is the "all good" code. Any blown fuses? Particularly ECMB?
-
RFuel pressure? Should be 9-13 although I have seen GM TBI that ran poorly at the lower spec. Check grounds. Please do not toss any...
-
RRicko1966 replied to the thread 87 tbi 350 popping at idle and running rich.I turned wrenches for a long time too 40 years give or take. You're right if it's intermittent he's probably not going to find it with a...
-
RRicko1966 replied to the thread Dexron II or Manual Transmission Oil??.One other thing you need to be aware of,if you use gear oil it make sure you are using the correct gear oil,verify what was suggested...
-
RRicko1966 replied to the thread One more electrical plug identification.At the distributor it's 1/8th 27 npt.
-
RRicko1966 replied to the thread Project is stalled. Cannot solve brake problem.The frustration is I told him what the problem was,then he tells me he looked at compared 2 pedals that neither one was what he has it's...
-
RRicko1966 reacted to Keith Seymore's post in the thread Project is stalled. Cannot solve brake problem with
Like.
Joining late; skimmed the thread and didn't see where he admitted going from manual brakes to power brakes - but - by way of help... -
RRicko1966 replied to the thread One more electrical plug identification.Ps126
-
RRicko1966 replied to the thread One more electrical plug identification.Standard ignition ps126
-
RI got one of those too, not so much for leaves (or at all, lol), but for blowing out the garage and barn floors. The broader area works...
-
RRicko1966 reacted to 84_c10_GMC's post in the thread One more electrical plug identification with Like.
Sounds good thank you! And yes I’m pretty sure one by distributor is 1/4” npt . But this block is an older block, 73, so I may need to...
-
RRicko1966 replied to the thread One more electrical plug identification.Some cars had a fitting and the pressure sender and the choke pressure switch both screwed into that fitting behind the distributor. If...
-
RRicko1966 replied to the thread What new tools have you got lately?.Put the grandkids in an office chair with a rotating pedestal let them aim the leaf blower left or right,never tried it with a battery...
-
RRicko1966 replied to the thread Project is stalled. Cannot solve brake problem.Read your post one,you left out the most important part. All this happened since I attempted to change from manual brakes to power...
-
RRicko1966 replied to the thread 87 tbi 350 popping at idle and running rich.Sure but if he doesn't have an aldl cable and software,or a tech 2 etc he can't do that anyway. He can test the values on his sensors...
