Ricko1966's latest activity
-
RRicko1966 replied to the thread One more electrical plug identification.I didn't look at your oreilly pic,at this point it's not a good decision to make. The switch is different if it's behind the...
-
RRicko1966 reacted to ChuckN's post in the thread What have you done to your square lately?? with
Like.
Not much happening today. Just picked the kid from school in the truck, drop off at Tae Kwon Do, then a fresh tank of ethanol free on... -
RProportioning valve bleeder tool. Amazon 7 bucks
-
RRicko1966 replied to the thread 87 tbi 350 popping at idle and running rich.You can check it with a multimeter,same with the air temp sensor,and the map sensor.
-
RRicko1966 replied to the thread Project is stalled. Cannot solve brake problem.Changing the pushrod length does not increase the pedal throw it moves the starting point and ending point,but it still moves the same...
-
RRicko1966 replied to the thread LE9 305 w ESC Performance upgrades '86 k5 Blazer.They had high compression,decent heads,a 4 barrel and a 929 cam,there's not much you can do to them,on a budget to make any real...
-
RRicko1966 reacted to mcarlo86's post in the thread LE9 305 w ESC Performance upgrades '86 k5 Blazer with Like.
Actually the ESC 305's had a pretty high compression ratio of around 9.5:1 or something in that neighborhood. They could do that and...
-
RRicko1966 reacted to TotalyHucked's post in the thread Help working with wheel arch replacement with Like.
Hey Steve, throw up some pictures to help explain what you're running into. I work at Auto Metal Direct and have our wheel arch trim on...
-
RRicko1966 reacted to projo198's post in the thread Any explicit help on removing AC components and keeping heat? with Like.
I ordered it on Amazon, but on a whim today I went to a junkyard and found a donor truck with EVERYTHING I need.... It was almost intact...
-
RRicko1966 replied to the thread Any explicit help on removing AC components and keeping heat?.Pic and info on this underdash heater. Fwiw if your heater core is there,and your just trying to get some heat,don't care what things...
-
RRicko1966 reacted to Bill USN-1's post in the thread 1987 454 TBI stalls at idle after a short time with Like.
We need to start with some basics before we can get deeper into your issues. 1. I like to see 2 files when working on a system. The data...
-
RRicko1966 replied to the thread 87 tbi 350 popping at idle and running rich.First thing I'd do is a power balance test. If you are running equally on all cylinders,I'd test fuel pressure,map sensor,coolant...
-
RIf you haven’t already- it’s not a bad idea to go to Fleabay and pick up a Truck Manual for your year. The wiring diagrams are handy for...
-
RYou probably didn't see my recent post in the audio section. I would NOT advise a train horn behind the seat.
-
RRicko1966 reacted to 84_c10_GMC's post in the thread One more electrical plug identification with Like.
No worries! I appreciate the help just trying to get this one right while I’m here instead of just making it work.
