Ricko1966's latest activity
-
RRicko1966 replied to the thread TH 400 needed.What do you think a good transmission shop charges hourly. Cheap ones charge 100.00 plus an hour.
-
RGive me a breakdown of the parts and their respective prices that add up to roughly $1,000 and I'll let you know if it's in the ball...
-
RFirst one could a been me, helping my cousin with an engine swap for one of our parts store customers. Guy had a '64 Impala 4 door...
-
RRicko1966 replied to the thread New Guy with a 84 C10 Shortbed.Id chemically strip it,one panel at a time,then prep and epoxy prime that panel. As an experiment pour a small pool of lacquer thinner...
-
RAre you also new to a carbureted vehicle that has a choke? You do know, you need to set the choke before starting the truck. Push the...
-
RRicko1966 replied to the thread A/C but no heat.Because he says he has a new heater control, I'd be checking blend door operation
-
Rare heater hoses hot, temperature difference between the 2? Temp split around 20-25 degrees indicates a plugged core, no or low flow...
-
RRicko1966 replied to the thread Trucks running werid.I'd check the flex plate,a cracked flex plate will clatter and the knock sensor will pull timing thinking you have preignition.
-
RRicko1966 replied to the thread Quadrajet Filter Spring.When you said this it made me think of 2 pics. IDK if they are fitting but. 1 is my ex the other is just a random pic that reminded my...
-
-
RRicko1966 replied to the thread Brake light issues.The 1157 does all three functions. It is brake tail and turn. That's why the turn signal switch controls power to turn signal and brake...
-
RRicko1966 replied to the thread Brake light issues.Wiggle the turn signal switch see if you can get the signals to go off and the brake lights to work. The turn signal switch controls...
-
RIf this is the 12 bolt from your other thread start at a .030 shim. According to Yukon instructions that's the nominal size. I've only...
-
RAhh that could explain the confusion then - I have the big block. It definately is the oil sensor/switch (3 wires, 1 to gauge 2 for fuel...
-
RRicko1966 replied to the thread 1987 Silverado fuel issue.Well I put this on the wrong post I was replying about the one piece fanshroud. Not the oil pressure switch. I was confused,I confused...
-
RRicko1966 replied to the thread Edelbrock accelerator pump.If it didn't stumble before with the timing where it is. It's not stumbling now because of timing .dont mess with the timing. That just...
