Ricko1966's latest activity
-
RSo your pinion needs to move closer to the ring gear. Keep in mind the gears need to be loaded when checking the pattern. Easiest way I...
-
RRicko1966 replied to the thread Edelbrock accelerator pump.I didn't read everything,but if I had a stumble that I didn't have,before, accelerator pump working. I'd be looking real hard at my...
-
-
RThis 100%. Vacuum controlled ones are factory on the OBS SUV's. Correct 5/8 and 3/4 hose size too
-
RI run this from old air products. Its cable controled and works good. https://www.oldairproducts.com/product/25-1018-bypass-heater-valve
-
RRicko1966 replied to the thread roof rust "paint?".You could use rustoleum rusty metal primer, it is meant to be painted over rust and won't work well on clean metal,top coat with regular...
-
RRicko1966 replied to the thread Can the heater core be turned off?.Idk why some people have problems with it some don't. There are pages of guys on 3rd gen and corvette forumns saying they have problems...
-
RBig updates: I installed a mechanical fan and it works great!! -summit racing 7 blade 19” steel fan -Hayden severe duty clutch -LMC 2...
-
RRicko1966 reacted to beady's post in the thread ‘87 454 TBI, NO Fuel spray, HAS fuel pressure, has 12v @ injectors, has spark with
Like.
So to close the loop, I repaired those two positive wires and the issues went away. Scanner can talk to ecu and reports no codes now... -
Rinteresting so how did the super cobra jet get its name no do not put motorcraft in pace of the quadrajet I saw on a ferd site that they...
-
RNGK numbering is backwards. 5 heat range is around stock. 6 is one step colder since its a 383 with 10.7 to 1 compression according to...
-
RNGK BKR6E
-
RHeres the paperwork that came from Blueprint. Same as what AFR recommended to start with. Dont have that paperwork anymore since its...
-
RYou can use one of these, properly sized for your hoses, and operate it manually instead of with a cable. I used something similar on...
-
RRicko1966 replied to the thread Turn signal troubles.Okay I didn't understand what you meant disconnected all wiring splicing off all trailer wiring. Sounded much more involved than tapping...
-
RAll I did was tap into the brown for liscense plate lights, brown being running lights and side markers. Those still work. Trailer...
