Recent content by Rich77

  1. Rich77

    Th350 not shifting

    The engine runs 10-12” when warm.
  2. Rich77

    Th350 not shifting

    Hey Guys, I have a ‘77 c10 400/th350. The transmission is newly rebuilt. The 400 has a pretty aggressive cam. I’ve checked my vacuum hose and fluids. The transmission won’t shift 1st to 2nd. I can drive in R or 1st, but it won’t shift into 2nd. Is it possible I need a power vacuum booster...
  3. Rich77

    Msd 8207

    So should I just run a wire from the unused ign tab in the cab to the coil?
  4. Rich77

    Msd 8207

    No, sir. I am not. The 8207 manual says it’s not required. How does your 8207 or box get 12v? Which wire? Do you use the wiring junction block on the firewall or no?
  5. Rich77

    Msd 8207

    Hello All, I have a ‘77 C10, sbc400(406)/th350. The truck was stripped when I got it. It had no engine wiring harness or distributor. I installed the Summit ready to run distributor and a MSD 8207 blaster SS coil. I’ve tried to wire this coil how they have in the installation manual but it...
  6. Rich77

    Exhaust pipe bracket

    Instead of welding in brackets/hangers, I decided to run an aluminum angle from one side to the other and bolt my hangers to that. I’ll trim the hangers down. Does anyone see an issue with that?
  7. Rich77

    Anyone run 18” on your 2WD?

    I just plan to tool around and smoke some rubber. I decided on: 295/45/18 rear on 18x9.5 245/40/18 front on 18x8 I’ll post some pics when it’s together.
  8. Rich77

    Anyone run 18” on your 2WD?

    Or, should I go- 295 or 285/40 or 45/18 rears And 245/40/18 fronts Thoughts??
  9. Rich77

    Anyone run 18” on your 2WD?

    Hello Everyone, My truck is a ‘77 C10 with a 2/4 drop. This is the wheel and tire combo I’m thinking of using. 285/60/18 rear with 18x9.5 245/60/18 front with 18x8 Does anyone think there’s an issue with that height of tire?
  10. Rich77

    Bolt pattern adapter

    I’ve got a 2/4 drop. So these are the sizes I’m thinking about- 285/60/18 rear with 18x9.5 245/60/18 front with 18x8 Any thoughts?
  11. Rich77

    No spark

    I did switch back to the other wire and it fired up and shut down as it should.
  12. Rich77

    No spark

    Yes, sir. It is a Quickfuel (Holley) 750.
  13. Rich77

    Bolt pattern adapter

    Are there any sites that sell wheels that fit squarebodies but will list wheels outside of the factory perameters? Some of them do, but not very well. Such as, why would a website say that a 18 X 9 1/2 wheel with 5x5 bolt pattern, 5.5” Bs, and 3.3”CBD not fit a 1977 Chevy C10? Is it just...
  14. Rich77

    No spark

    I did get it running last night. I had this feeling that it was a fuel issue. I started tinkering with the carb fuel bowl levels. When I cranked them way down, it would fire and keep running. But then I couldn’t get the truck to stop running. I turned the key off and it kept running. I think...
  15. Rich77

    Exhaust pipe bracket

    Thank you!
See more

Latest posts

Forum statistics

Threads
45,454
Posts
983,817
Members
38,502
Latest member
GorillaHumper
Top