Recent content by mummertj

  1. M

    Rear disc conversion

    if you did it or decide to do the disc conversion, I would be interested in the backing plates you take off Thanks
  2. M

    ISO 73-83 13” brakes backing plates

    I’m looking for a set of backing plates for 73-83 8 lug semi-float rear with 13” brakes Any body out there have a set that were taken off for a disc conversion ?
  3. M

    Backing plates

    Ok so do you think they are the same ?
  4. M

    Backing plates

    Anybody out there know if the backing plates on a full float and semi float 14 bolt 8 lug rears are the same
  5. M

    1979 K 20 Frankentruck emergency brake cables

    I have a 79 K 20 that I am replacing almost everything under and on it I had mis matched rears and replaced the rear differential, the one in it was hacked up pretty bad, I bought a 14 bolt from a 92 suburban to put in it Rear is in and everything looks peachy until I went to put in my new...
  6. M

    steering knuckles

    I bought a 1-ton crossover left side steering knuckle for my 79 K20 It turned out to be different in the tie rod taper (made to install top down) The kit included a tapered insert to flip it over, but the new knuckle seems slightly different it's a Dana 44 / GM 10 bolt Kit It looks like the new...
  7. M

    Front inner bucket seat bracket

    did you make them yet I have a set of those you can have
  8. M

    K 20 Body mounts 73-80 Truck

    Im looking for a set of body mount bushings for a 78 K 20 truck I need all three sets I have The PST bushing set but i do not have any of the original hardware ( the insert sleeves ) which PST says are needed Does anyone have a set or can anyone tell me if the two wheel drive and four-wheel...
  9. M

    Round to square

    I have a 79 K 20 If i wanted to change the headlights from round to square is it as simple as changing the headlight buckets from a 1980 or would i need to change core support Thanks
  10. M

    Dana 44?

    Can Anybody help me determine just what I have I have a 79 K 20 and need oil seal and yolk for the front Differential So far all ive seen is that its a Dana 44 but so far the oil seal does not fit and I need a new yolk and am being told about 50/50 that the 8091 fits and the 3581 fits but other...
  11. M

    79 k 20 front stabilizer bar

    I have a 79 K 20 and am cleaning replacing most of the front end parts Can any one tell me if the front stabilizer bar should be straight between the frame mounts Mine has a slight bend in it am I’m not sure if it’s supposed to be there and judging by the condition of the long tie rod end I...
  12. M

    Dana 44 dust shield on backing plates

    Does anyone know where or if you can buy these dust shields separate anywhere or at least what they are formally called to search for them ?
  13. M

    Bucket seat swap

    I have a 79 k 20 and have a set of bucket seats and console out of a suburban What seat tracks can I use or does someone make an adapter
  14. M

    cab/Body mounts

    I have a 79 k 20 regular cab truck That has an 81 cab on it I want to replace the body mounts but the split is between 80 and 81 does anyone have any history on this which kit should I use what’s the difference between the two kits do I need to combine both kits
  15. M

    Swapping seats

    Does anyone have a template for swapping a bench seat to bucket seats and console Can I reuse any of the original threaded openings or do I need to drill four new ones
See more

Latest posts

Forum statistics

Threads
45,453
Posts
983,747
Members
38,501
Latest member
thatgermanguy
Top