Memaloose's latest activity
-
I checked it out but it appears my issue is I may have the Throttle cable it doesn’t go back far enough to touch the kickdown switch... -
If it’s close, slip a piece of rubber hose over the switch. You can also use a hose clamp on the switch knob. McGuyverism!!
-
I believe that factory TH400 cars and trucks did have an specific bracket that had provisions for the kickdown switch. I've looked into...
-
So what you're saying, the switch works fine, just that pedal, when mashed down to the floor, doesn't trigger the switch? Those are...
-
It ain't a FLOWER......that's PEDAL.......Mike is gonna get ya @SquareRoot
-
Replace all wear items in the front suspension. Convert the steering shaft to the Jeep type and lose the rag joint in the process. Make...
-
Pretty much any grease as long as you use it regularly??
-
Memaloose replied to the thread What is this gauge?.I had one very similar on my 1983 Olds Toronado.
-
They are still around. If you want to spend some $$$$$$. Maybe just because it's the Oldsmobile version. The GMC part number is GM 2234611
-
Memaloose reacted to pduffyd's post in the thread Help - Inherited a 1978 C20 with SM465 disassembled with
Like.
Hi gijordan07. When I rebuilt mine a while back this guy took you through step by step. Site down with a beer and watch part 1 and 2. -
Memaloose reacted to Dmack's post in the thread Help - Inherited a 1978 C20 with SM465 disassembled with Like.
No help on the internals, but since they are basically bulletproof and not rare, I would just look for a cheap used one. But good for...
-
Slow train slow life but I’m back to work on the dually. Just can’t give up on the old truck. Got handful of parts for the swap and a...
-
I have installed bucket seats into my ‘86 Suburban I had someone else do it for me. They sit a little high, just as well I’m only 5’6”...
