Matt69olds's latest activity
-
Matt69olds replied to the thread Intermittent cruise control.Find the cruise control lever connector at the base of the steering column. It has 4 wires with a white connector, with the matching... -
Matt69olds replied to the thread Wiring harness and random connector 1987 R10 305 TBI.That splice is factory. Proving once again that there is NOTHING wrong with soldering wires if properly done!! I’m not so sure about...
-
Matt69olds replied to the thread Modified engine crewcab gas mileage?.Ok, that makes sense. FYI, you could buy 50 of those fuel miser converters for the cost of ONE lockup th400 trans!
-
-
Matt69olds replied to the thread Good wire for repairs and/or rewiring circuits?.Mosier, electrical depot, and Waytek are good venders for wire. You might want to rethink the plan to use one gauge wire for...
-
Matt69olds replied to the thread Modified engine crewcab gas mileage?.How do you install a lockup converter on a 400??? I have seen the kits to modify a 400 for a lockup converter. It’s intended for big...
-
Matt69olds replied to the thread Modified engine crewcab gas mileage?.Unless you’re making 800hp, you don’t NEED a built 400 or 4L80. Either one in good condition will handle easily handle 500plus hp with...
-
Matt69olds replied to the thread Modified engine crewcab gas mileage?.No lockup converter, and more expensive than a junkyard 4L80 build.
-
Matt69olds replied to the thread I’m pretty pissed!!.Rough country said with the relocation brackets, the ball joint geometry is basically as it was stock, just everything is moved down 4...
-
Matt69olds replied to the thread Fuel Miser Torque Converters.It Hughes, I would expect quality. I wouldn’t expect miracles, but I would bet it performs exactly as advertised.
-
Matt69olds replied to the thread I’m pretty pissed!!.Interesting! Ill look into that before fooling with junkyard parts.
-
Matt69olds replied to the thread I’m pretty pissed!!.I agree, why pay a premium when you can buy the same junk for significantly less?? It just really chaps my ass. Their penny pinching...
-
Matt69olds replied to the thread I’m pretty pissed!!.The lift kit is basically relocation brackets that bolt where the factory control arms went, with new mounting brackets 4 inches lower...
-
My son and I have been finishing up some of the winter upgrades to his 92 Yukon. Some of the upgrades include: Rebuilt transmission...
-
Matt69olds replied to the thread Loose timing chain replacement.Rotate the engine until the dots are lined up, remove the old chain WITHOUT moving the cam or crank. As long as you install the chain...
-
Matt69olds replied to the thread What’s the best way to fix/clean up this wiring problem?.Go to your nearest salvage yard, get a junction block from a newer truck. Run ONE large power cable from the battery to the junction...
Latest posts
-
Old school Pioneer head unit, should I or should I not???
- Latest: plumtruckerd
-
-
-
-
