Mango's latest activity
-
3000 for the change and a quality filter like Wix or Purolator -
Not needed. It'll gum it up. Oil needs to splash and flow inside the engine. It doesn't need to cling to everything, it already...
-
Mango replied to the thread Quad Shocks.Leaf Springs not bottoming out, the bushings have been replaces last summer, Still looking for the OEM or similar shocks Thanks for all...
-
I'm thinkin he meant the rear 2 of the front 4 shocks.
-
Bilstien I prefer the Aux position more vertical more travel 360/80 valving. Stock position is less travel and lighter 255/70 valved...
-
Also don’t over torque shackle and spring bolts if they don’t slide freely ride is stifffff
-
Hey All Quad Front shocks for a 1989 4x4 burb V1500, replaced them with some random brand from NAPA about three years ago. Feels like I...
-
Used the Mr gasket 5657 and now it works great! You can cut it to fit. No more big loop to bind up.
-
Copper or soft aluminum crush type washer worked for me.
-
I would try an appropriate size rubber washer and teflon tape on the existing bolt. While it kind of defeats the purpose, as a final...
-
Oh man, I’m sorry I didn’t see this conversation earlier. I once had an oil filter that would not come off with any tool that I had, to...
-
Mango replied to the thread Wiper Interior Switch.Well after tearing into the steering colume, went to pull the turn arm off and just the plastic pulled off! that was the problem not...
