hey mister's latest activity
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.I gave a bit more thought to the comment that this is nothing more than a boobtube video. Obviously I disagree.. If this was nothing... -
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Well, crack a brew and enjoy the entertainment. I hope this thread serves as an inspiration for others putting up with that carb that...
-
Gravity... If there is any little bit of a leak on the check valve in the pump, it will siphon the fuel right down to the air break...
-
Moss Motors sells a kit with the bushings and a reamer, so I know they parts are available - just their kit is pricey and I'm not sure I...
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Interesting.. How can fuel "drain" back? Fuel would have to flow against the fuel pump.
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.So, I'm not a fan of boobtube. In a number of "how too" videos, I've seen them intentionally give information that was sure to sabatoge...
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Yes, the .007 was prior to installing the new bushings.
-
hey mister reacted to legopnuematic's post in the thread Quadrajet Primary Shaft Bushings with
Like.
@JD Miller if I’m reading it right, the .007 clearance was pre machining/bushing install. -
hey mister replied to the thread Quadrajet Primary Shaft Bushings.From what I can tell from pictures, there seem to be enuf meat to install bushings on the SU's. The real issue would be, are there...
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Oh that is brilliant. I would of never thought of valve stem seals..brilliant. I am offering a service to do the bushings @ $50.+ s/h...
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.So here is one mod I like and I got the idea from a rebuild kit I had seen. The float seat had been slotted to assist in fuel flow. So I...
-
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.Motorcycle carbs were prone to this as well. In fact the Goldwings had this issue. But if you were a tad ingenous, soft washers could be...
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.This is the setup on the mill to bore and ream for the bushing. Prior to machining, I checked the bore and shaft with gauges and a mic...
-
-
hey mister replied to the thread Quadrajet Primary Shaft Bushings.I guess it's all in your perspective. Something like that, I don't consider work. It's a fun little project to fix something.
-
I dont doubt you on the "dont use spray lube". Just wondered why. I dont use it anyway. WD40 turns to a varnish I have acetone, and Id...
Latest posts
-
-
-
-
-
Update: The surging stopped....took me by surprise- Latest: backwoodsman