Craig Nedrow's latest activity
-
GUIDELINES FOR RETROFITTING R-12 VEH. TO R-134A REVISION: 07/21/94 THIS BULLETIN IS BEING REVISED TO: 1) ADD THE 1991-93 C CARS AND... -
1) Get a new tube, they're cheap and yes will work with 134a. I do not know about the auto adjust kind. 2) Green seals are a must...
-
I have no personal experience. What I've gathered is that some have good luck with them, and some hated them and swapped for a standard...
-
pag oil is a must, the green ones are indeed compatible with r134a If you would like the TSB gm issued for 1987 R/V trucks -1991...
-
To my knowledge, all orifice tubes are "compatible" with 134, it's just a matter of what is the right size. If it's a single cab truck...
-
I think the green O rings are compatible with R 134. Thats the ones I have used and have not had any problems. I'm not sure on the...
-
My 86 is 4:10 rear, and i use low gear 1st alot. Usually around the yard or when towing. Not usually in town just driving around. In...
-
Non synchro first isn’t an issue up shifting. Down shifting on the other hand is where the fun begins. Pretty much have to float it in...
-
Good to know on the clutch. Bummer on the housing... A friend of mine told me the computer should be okay, because 92 was a dumbed...
-
Your existing clutch will work, it's just standard Chevy stuff. I don't think the squarebody bellhousing and slave will fit at all...
-
Okay, good to know. The sm465 is 4wd. Is currently paired with a np208. I have 2 other NP 241s that were paired with a NV4500 and a...
-
I don't know much about the newer body style trucks but I do know the sm465's used in them had the shift tower located a few inches...
-
Craig Nedrow reacted to Ricko1966's post in the thread Need help with my 700r4 TTC wiring harness with
Like.
Why do you want to? The only way I can think of to wire it your light would light when power was applied to the tcc solenoid.But that... -
Craig Nedrow reacted to Matt69olds's post in the thread Need help with my 700r4 TTC wiring harness with Like.
This is the method I used to wire the TCC on my 81 GMC. The only difference, I used a time delay relay I bought from Amazon. It was...
-
Craig Nedrow reacted to Jgonick's post in the thread Need help with my 700r4 TTC wiring harness with Like.
This was my understanding also- I also don't have an EGR (wires are just tied up out of the way.) The wiring diagram you posted is how...
