Craig Nedrow's latest activity
-
Craig Nedrow reacted to HotWheelsBurban's post in the thread Starter - Looking for Quality with
Like.
One thing you definitely want when you get one of the Permanent Magnet Gear Reduction starters (the smaller case starter the later model... -
Craig Nedrow reacted to PrairieDrifter's post in the thread Starter - Looking for Quality with Like.
I used a like 1997 truck "mini" starter, I think delco. It's just a factory gear reduction starter, they work great. Haven't had an...
-
Hi 4x4 Team, I am finishing my suburban build and I need a starter. The internally balanced 383 engine block on my 78 burb is out of a...
-
Craig Nedrow reacted to SquareRoot's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
I wouldn't waste any time or money on that. Buy a 14 bolt and be done with it. If you liked the way it sounded and felt before it...
-
Craig Nedrow reacted to Turbo4whl's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
If the pin part of the bolt is still in hole as Rick stated, you can drill it out. Remove just the right side bearing cap, then with a...
-
Craig Nedrow reacted to Ricko1966's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
There should be markings on the ring gear that tell you gear ratio. Or just count teeth on ring and pinion and divide. The pin for the...
-
Craig Nedrow reacted to Turbo4whl's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
That was a GM Gov loc diff. Time for a rebuild.
-
Craig Nedrow reacted to PrairieDrifter's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
Wtf lol... don't need a bolt if you mushroom both ends of the center pin :rofl: colored rtv is always the signature of a true craftsman...
-
Craig Nedrow reacted to Nasty-LSX's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
-
Craig Nedrow reacted to Nasty-LSX's post in the thread Remember When I was asking for help from anyone locally!. Pic's inside. with Like.
Is there a way to tell what gear I have with the Diff cover off? I never found anyone who could help me. The rear end would pop/snap...
-
I got the conduit from a newer truck at the pick and pull, and just used the dimples as a guide to drill the holes. I do remember that...
-
There are dimples on the door and on the cab door for this. On the cab side the factory put in an oval hole. Most people just put in a...
-
Craig Nedrow replied to the thread Fuel tank straps.I did this not to long ago. Would not do it in the truck, and besides if you drop the tank it will allow you to cleanup and paint...
-
Welcome to the forum
-
Servus und willkommen aus Österreich. Sehr cooler pickup.
