ChuckN's latest activity
-
ChuckN reacted to TotalyHucked's post in the thread Thinking about a new smaller steering wheel, comfort grip or forever sharp? with
Haha.
5' 7" or 5' 8" depending on the day lol -
Glad I don’t really have neighbors that close. My mom has about 15 acres. She said someone in the next parcel over was firing off his...
-
ChuckN replied to the thread Thinking about a new smaller steering wheel, comfort grip or forever sharp?.Just curious, how tall are you? I’ve thought about something like this but the stock wheel already feels close to my chest (I’m 6’).
-
ChuckN reacted to edgephoto's post in the thread AC Condenser - Should I use New Or Original. with Like.
I have converted hundreds of old R12 systems to R134a. I worked as an auto tech back when they phased out R12. Converting was simple...
-
@EvilGenius this subject got moved to here. I just wanted to tag you in it so you could follow along.
-
These are the ones I used for the design all slightly different but the black bull bar is close to the look I'm going for
-
Progress on the bull bar I used 1/4"×6" plate 2ft Long each some scrap angle iron for the mounts and some 2 1/2" scrap pipe and some...
-
Previously Posted this on the wrong thread... so I'm making a bull bar for the 75 and scored some hella lights for the trucks and a 5th...
-
Several smaller jobs today. Replaced the cowl screen after spraying the inside of the cowl with WD40 and wiping it down. Cowl was very...
-
ChuckN replied to the thread What have you done to your square lately??.Got out to the garage and routed the O2 sensor cable into the cab. Then, since someone before me chopped the bezel to bits for a radio...
-
-
Theres a company I found that sell's rebuilt GM columns with or without a core exchange... IIRC a rebuilt column was like $800-$900 not...
-
ChuckN replied to the thread O2 sensor question.Thanks For that. I got to thinking, and went out to the garage. In my minds eye, the extension wire from the control module was going to...
-
The wires would be released from the back of that connector. So the rubber was molded after the connector was assembled. Use a hole...
-
You might give Innovate a call and see if they have a suggestion. Making a hole big enough to fit that O2 sensor connector through is...
-
ChuckN replied to the thread O2 sensor question.Well, can’t take the wires out of the O2 sensor connector since there is a calibrated resistor in there that will mess it up. Ho-hum.
