CalSgt's latest activity
-
CCalSgt reacted to 1STLS1's post in the thread Recommend Me a Reliable/Budget Serpentine Kit with
Like.
A third vote for adapting a OEM one. They don't exactly give them away at the salvage yard, I paid $250 at a pick a part a couple years... -
CCalSgt reacted to Catbox's post in the thread Recommend Me a Reliable/Budget Serpentine Kit with Like.
I pulled the set up off a 1992 V8 Camaro. It cost $80 out the door with the alternator and power steering pump on the brackets. I am...
-
CCalSgt replied to the thread Recommend Me a Reliable/Budget Serpentine Kit.General Motors… A serpentine set up from a GMT 400 (either the 88-95 or the 96-99) can be had for nearly no money from a wrecking yard...
-
-
CYep, just use the original pump connector at the wiper motor, to power a universal remote mount pump. I've done that many times, it's...
-
CCalSgt reacted to QBuff02's post in the thread What gauge size/diameter to replace stock ?? with Like.
I used 2 5/8" autometer gauges on mine, used an appropriate hole saw to drill the tubes off the bezel and a deburring tool to fine tune...
-
CDid they cut all three wires to the alternator? Starter should have two wires with fusible links going to the main post along with the...
-
CCalSgt reacted to Grit dog's post in the thread Who said you need 4X4 to drive in desert, when you have a SquareBody? with Like.
Ha badass! And what a truck! Get a fat set of wheels with sand paddles, then it’d really rip? Is the 5.3 stock or does it have some...
-
CCalSgt reacted to QTR83's post in the thread Who said you need 4X4 to drive in desert, when you have a SquareBody? with Like.
Over the weekend I decided to test my car in the sand and I was very impressed with its performance even though it is only rear wheel...
-
CThe '73 is wired a little differently than later trucks because it has points (not HEI) and it has an ammeter in the dash. 1. large...
-
CCalSgt replied to the thread Starter Wiring Issues.EDIT: @75gmck25 beat me to it My truck never had the wire to the coil like @Ricko1966 mentions, Dad tells me that’s a pre HEI thing. 1...
-
C1 wire from ignition switch to solenoid to engage the starter. 1 wire from r to ignition coil to give more voltage at crank. Remaining...
-
CCalSgt replied to the thread Forward Cab Spacers.Rubber rides softer but poly is allegedly tougher
-
CThanks @CalSgt, I jumped on Summit to check. The spacers I found came with rubber bushings. I already have poly bushings, and I hate to...
-
CCalSgt replied to the thread Forward Cab Spacers.I bought the Goodmark ones from Summit, they seem high quality.
-
CCalSgt reacted to vr1967's post in the thread NP241-C, non VSS. Can I convert to VSS or no. No luck!! with Like.
Got me to thinking now. I still have a driver’s drop parts 241. Wonder if I could 3d print an adapter to go in the original hole? Or...
Latest posts
-
-
-
-
-
Update: The surging stopped....took me by surprise- Latest: backwoodsman