BadBowtie's latest activity
-
I wouldn't worry about it unless it actually is a problem. And even then, eh. An extra minute or two every oil change is no big deal. -
Wouldn't cut the baffle out unless necessary. PVC will suck oil or possibly spray out on breather side. Once it's out it's gone.
-
You can definitely fill oil through those. However, some cheaper covers occasionally have a baffle that doesn't flow oil as well as...
-
Ok, so I ordered this nice set of valve covers on a kinda last minute order from LMC. Two Questions. One, can I fill oil from this...
-
BadBowtie replied to the thread 1981-82 Metal Lower Tailgate Mldg.Yes. But that design was only used early on. 1981-82 models. I bet your truck's tailgate had been swapped at some point in life with an...
-
My '84 K20 Silverado Fleetside had the tin trim on tailgate and when I had the truck painted it was removed and replaced with the...
-
I was around in 1985. I was still running boost!
-
Could be the flux capacitor about to activate at precisely 91 mph thus sending him back to 1985?
-
Not the way he described it in post 1. He's tripping the breaker in the switch.
-
:popcorn:
-
Before you do anything disconnect all headlights at the same time. Take a multi meter and check continuity to ground. Each headlight...
-
Thanks, I'll still go ahead and try a new switch, then have one of my electrician buddy's help me with a relay.
-
No,most common would be just what was factory,maybe a little less with today's quality parts.But you couldn't up the amperage on the...
-
I am assuming the newer made switches are designed to handle the extra current drawn by the newer bulbs...
-
Ya, good points. 70's-80's Dodges were the kings of corrosion growing way up into harness wires, Chevy's undersized. Sometimes just...
