AuroraGirl's latest activity
-
Start with the dash cluster. There should be a black ground wire up high under the dash. On an '87 I think there is a ground bus it... -
AuroraGirl replied to the thread Faulty rigged.The weird part to me is the manual valve, you both seem to have had a solenoid
-
My truck had a dealer-installed aux tank and it looked just like the square one in your picture. I got a factory tank, solenoid, hard...
-
-
AuroraGirl replied to the thread Smoking Ground Wire.you need to shore up the grounds. Heads to the firewall. frame to core support. Engine to battery. core support to battery.
-
AuroraGirl replied to the thread Mechanical fuel pump return line.Heres my 3 port pump, for another example
-
-
AuroraGirl replied to the thread Mechanical fuel pump return line.not sure about 85 but there is a chance HD emissions without evap may have been offered in 85, if it was, there would be short little...
-
I didn't suss it out line by line but I think we are saying the same thing. The only item I would take issue with is the picture of the...
-
AuroraGirl replied to the thread Mechanical fuel pump return line.also even if the fuel wasnt vapor in the line, the moment it starts sucking gas , you will cause it to boil (under a vacuum, the boiling...
-
As AuroraGirl said, make sure the sending units are grounded. Unscrew the bolt, sand down the frame to bright metal, and screw back in...
-
AuroraGirl replied to the thread gas gauge.it takes a ground. the sender needs to be grounded to the truck frame, and the wire from the sender that goes to the switch yes I would...
-
AuroraGirl replied to the thread Engine mount, old or new?.If your engine moves around a lot esp with a broken t case mount(or transmission), you can twist the buckets that those mounts bolt to...
-
AuroraGirl replied to the thread Engine mount, old or new?.https://www.offroaddesign.com/competition-style-motor-mounts-for-73-to-87-gm-small-block-or-big-block.html
-
AuroraGirl replied to the thread K5 Blazer Shift Indicator.You could have replaced the column detect to get the shift indicator working right. But no light source without the original cluster
-
AuroraGirl reacted to 1lejohn's post in the thread LMC truck has the wrong window regulator rollers.... with
Like.
My window regulator broke again. I used a whole new assembly. I've come to hate these trucks power windows. The one roller pulled out of...
Latest posts
-
-
-
-
-
Update: The surging stopped....took me by surprise- Latest: backwoodsman