pduffyd
Latest activity Postings About
-
-
Thong Speedo work for you? Or A$$less leather chap in G string? This thread has scarred me for life. Lmao -
pduffyd replied to the thread Help - Inherited a 1978 C20 with SM465 disassembled.Hi gijordan07. When I rebuilt mine a while back this guy took you through step by step. Site down with a beer and watch part 1 and 2.
-
pduffyd reacted to Redfish's post in the thread What could this random tube attached to the exhaust be? with
Like.
It almost looks like a poorly fabricated heat riser. The truck originally had a heat riser that ran from the exhaust manifold straight... -
pduffyd reacted to Radiohead's post in the thread What could this random tube attached to the exhaust be? with Like.
That's what I'm seeing too
-
I've got the front fenders, including the inner fenders, the radiator mount and a good hood. It's got the headlights in it. It's got the...
-
Or crack the block.
-
The dowels are the same, I am not an expert but, I don't think a bellhousing for an 10.5" clutch will fit over an 11" clutch. Also, have...
-
the trans originally had a z bar clutch, did you have a hydraulic setup to put on it? I see you said you had the bellhousing and all...
-
Also, make sure you have the starter brace installed or you will snap the starter bolts.
-
pduffyd replied to the thread Bell housing not fitting right?.Hi pmehringer001. Here are a couple bellhouse part numbers for your 465. They are for the 12" clutch or smaller you can see the bigger...
-
-
pduffyd replied to the thread Cracked frame/shock mounts help.I have this kit on my C20. Works good. Where the cracks on the frame are, drill 1/8" holes at each end on the crack (stops the crack...
-
Clutch Selection This is where I hit a brick wall. I had read several places that you could use a factory clutch setup for the...
-
Master cylinder mounting To mount the master I used the hole that speedometer cable passes through the firewall. If you’re using a 96...
-
This is how I went about installing a 96/97 S10 NV3500 into my C10, this way worked for me and will probably be a little different if...
-
-
Loading…
-
Loading…
