-
-
RRottenSquare replied to the thread Wire identification 81 c30 dually.Appreciate the help @Craig 85
-
RMy ‘85 is setup this way. The pod on the carb is vacuum operated. There is an electric solenoid mounted on my thermostat housing that...
-
RRottenSquare replied to the thread Wire identification 81 c30 dually.Dang!!! Thank you so much. That is probably what it is.... It was that Solenoid on my carb was bypassed to a switch on the dash. Was...
-
RThe relay on the firewall could be for the pod on the driver's side front of the carb. Mine is mounted on the valve cover. On my '85...
-
RRottenSquare reacted to nvrenuf's post in the thread Replacement links for factory rear sway bar with
Like.
1st gen Dodge 4wd's have a similar sway bar set up on the front, maybe check those links. -
RRottenSquare replied to the thread Replacement links for factory rear sway bar.Thanks! I guess I am just being lazy haha, figured it would be easier and cheaper to order a set of links instead of trying to make...
-
RRottenSquare reacted to nvrenuf's post in the thread Replacement links for factory rear sway bar with Like.
Many moons ago I added a dually sway bar to my lifted SRW crew cab so the links didn't reach, this is what I used - - all thread the...
-
RRottenSquare posted the thread Replacement links for factory rear sway bar in Suspension, Steering & Brakes.What end links are you guys using for a Factory rear sway bar? Both of my links were missing on the truck (81 C30 Dually 2WD). Rockauto...
-
RRottenSquare replied to the thread Wire identification 81 c30 dually.I may have found the answer to the one item... the module on the firewall. Looks like it was a relay for a SMOG pump. Or something along...
-
RRottenSquare replied to the thread Wire identification 81 c30 dually.Any help or guidance would be appreciated. Been searching high and low, and am unable to get a solid answer unfortunately.
-
RTrying to identify the blue and green wires that come out of the cab. Truck is a factory 350 4 speed. Now has a 454 turbo 400. Some...
-
-
RRottenSquare replied to the thread Parking Brake cable routing 131.5" C30 Dually.This does actually help. So it would look like I am missing the longer hanger. I will see if I can make something up then. . . Thank you!
-
RRottenSquare reacted to straydog371's post in the thread Parking Brake cable routing 131.5" C30 Dually with Like.
Maybe this will help (yellow highlight in picture)? It looks like there should be a longer loop hanger anchored in front of trans...
-
RHi all! I cannot seem to find an existing thread for my specific application. I did find some but for different frames and/or for a...
-
RRottenSquare replied to the thread '81 C30 Regular cab DRW Drop.Awesome thanks for the input everyone !
-
-
Loading…
-
Loading…
