You’re Doing it Wrong !! Two tone Paint

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

FireTruck1984

Full Access Member
Joined
Jan 7, 2019
Posts
2,981
Reaction score
9,891
Location
Michigan
First Name
Ted
Truck Year
1984 and 1984
Truck Model
High Sierra K1500 350. Sierra Classic C1500 305.
Engine Size
350, 305
The top level Two Tone paint trim package ( Exterior Decor Package ) on 1981-1987 Trucks.
It’s a great look when done right… that being said, it’s becoming much more common that guys are getting it all wrong when repainting their trucks.

The center contrasting paint (Band) will gradually dip and follow the contour of the hood. The front corner should land at.. or slightly below the height of the grille.

What I’m seeing more often than not on repaints is the band painted way too high at the front. Even Professional paint guys at reputable shops are guilty of this! This mistake immediately draws your eye and tells you something is very off.

Here’s some pics of the Wrong way and the Right way…
Wrong Way
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Wrong Paint Detail
 
Last edited:

FireTruck1984

Full Access Member
Joined
Jan 7, 2019
Posts
2,981
Reaction score
9,891
Location
Michigan
First Name
Ted
Truck Year
1984 and 1984
Truck Model
High Sierra K1500 350. Sierra Classic C1500 305.
Engine Size
350, 305
Correct Paint Detail
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,688
Reaction score
3,702
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
Eh.... I think the wrong way looks fine. The correct way pictures do look better than the brochure photo though, maybe because the don't show the whole side of the truck.
 

Goldie Driver

Full Access Member
Joined
Mar 19, 2018
Posts
4,034
Reaction score
6,608
Location
Houston, Texas
First Name
Britt
Truck Year
1980
Truck Model
GMC K1500 Suburban
Engine Size
350
I think the factory way looks more betta - it emphasizes the sloped lines of the front fender. having said that, it looks like correct trucks 2 & 4 have different heights than 1 & 3 ...


:crazy:
 

FireTruck1984

Full Access Member
Joined
Jan 7, 2019
Posts
2,981
Reaction score
9,891
Location
Michigan
First Name
Ted
Truck Year
1984 and 1984
Truck Model
High Sierra K1500 350. Sierra Classic C1500 305.
Engine Size
350, 305
Eh.... I think the wrong way looks fine. The correct way pictures do look better than the brochure photo though, maybe because the don't show the whole side of the truck.
Doing it Wrong only shows that the builder takes no pride in his work.
Imagine going through all the trouble to prep the job and get the body perfectly straight.. only to F..k up the paint details.
 

FireTruck1984

Full Access Member
Joined
Jan 7, 2019
Posts
2,981
Reaction score
9,891
Location
Michigan
First Name
Ted
Truck Year
1984 and 1984
Truck Model
High Sierra K1500 350. Sierra Classic C1500 305.
Engine Size
350, 305
I think the factory way looks more betta - it emphasizes the sloped lines of the front fender. having said that, it looks like correct trucks 2 & 4 have different heights than 1 & 3 ...


:crazy:

The first 4 pics are the wrong way.

Next 4 pics are the right way to do it.

And yes you’re right on that.. the first 2 trucks are laid out differently and both are wrong.
 
Last edited:

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,688
Reaction score
3,702
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
Doing it Wrong only shows that the builder takes no pride in his work.
Imagine going through all the trouble to prep the job and get the body perfectly straight.. only to F..k up the paint details.
That's the thing about being a gearhead/hotrodder... Build what you want because you like it that way regardless of the "correct" or "factory" original way.

However if I paid for a paint job and asked for a "factory" period correct two-tone I would be pissed if it came back with the wrong paint job (top photos), that shop would be repainting it free of charge.
 

Goldie Driver

Full Access Member
Joined
Mar 19, 2018
Posts
4,034
Reaction score
6,608
Location
Houston, Texas
First Name
Britt
Truck Year
1980
Truck Model
GMC K1500 Suburban
Engine Size
350
The first 4 pics are the wrong way.

Next 4 pics are the right way to do it.

And yes you’re right on that.. the first 2 trucks are laid out differently and both are wrong.


Pics are mo betta - let me explain.

Truck 1 :

You must be registered for see images attach



Truck 3 :


You must be registered for see images attach



Truck 2 :

You must be registered for see images attach


Truck 4:


You must be registered for see images attach



Looks to me like the paint sits higher up on the body line on 1 & 3.
 

Keith Seymore

Full Access Member
Joined
Jul 13, 2015
Posts
2,845
Reaction score
9,037
Location
Motor City
First Name
Keith Seymore
Truck Year
1987
Truck Model
R10
Engine Size
4.3L
One other observation: in the factory the secondary color was sprayed first.

The stripe sticker had a pre-mask on top. So the order was: spray the secondary color, allowing overspray above and below. Install the stripe. Mask the shape of the insert using butcher paper and masking tape. Spray the primary color. Remove the paper, Masking tape and pre-mask from the stripe and Viola! two-tone paint job.
 

FireTruck1984

Full Access Member
Joined
Jan 7, 2019
Posts
2,981
Reaction score
9,891
Location
Michigan
First Name
Ted
Truck Year
1984 and 1984
Truck Model
High Sierra K1500 350. Sierra Classic C1500 305.
Engine Size
350, 305
Pics are mo betta - let me explain.

Truck 1 :

You must be registered for see images attach



Truck 3 :


You must be registered for see images attach



Truck 2 :

You must be registered for see images attach


Truck 4:


You must be registered for see images attach



Looks to me like the paint sits higher up on the body line on 1 & 3.
OK Yes, especially on 3.. it’s a little higher. but as we all know, there is always slight difference from the factory (Factories).

I’m just surprised painters don’t do a little research before their layouts.
 

FireTruck1984

Full Access Member
Joined
Jan 7, 2019
Posts
2,981
Reaction score
9,891
Location
Michigan
First Name
Ted
Truck Year
1984 and 1984
Truck Model
High Sierra K1500 350. Sierra Classic C1500 305.
Engine Size
350, 305
One other observation: in the factory the secondary color was sprayed first.

The stripe sticker had a pre-mask on top. So the order was: spray the secondary color, allowing overspray above and below. Install the stripe. Mask the shape of the insert using butcher paper and masking tape. Spray the primary color. Remove the paper, Masking tape and pre-mask from the stripe and Viola! two-tone paint job.
Keith.. I’ve said it before, you have the best inside scoop!
 

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,688
Reaction score
6,851
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
just to satisfy ones contempt for consistency or a contempt of organized society as a whole, make sure on the truck which appears displeasing to have misaligned panels so that no lines that should be seamless flow or line up :)
The red and white truck is very displeasing to the eyeballs...
The rebel inside wants to see society bur- i mean, the universe to tend to disorder muhahah
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,092
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
My biggest pain is when the new '81 fenders hit the scene. They lost that body line where the chrome (aluminum actually) strip was mounted and curled around the front fender facing to the rear. That is where the two tone border was. With or without the body trim, it looked great.
 

Goldie Driver

Full Access Member
Joined
Mar 19, 2018
Posts
4,034
Reaction score
6,608
Location
Houston, Texas
First Name
Britt
Truck Year
1980
Truck Model
GMC K1500 Suburban
Engine Size
350
just to satisfy ones contempt for consistency or a contempt of organized society as a whole, make sure on the truck which appears displeasing to have misaligned panels so that no lines that should be seamless flow or line up :)
Sadly, on my '80, that applies to the passenger side front fender ...

And, some of the trim.

I think body panel gaps & lines were a bugaboo for the American manufacturers for a looooong time.
 

Latest posts

Forum statistics

Threads
43,952
Posts
946,407
Members
36,003
Latest member
Truck82
Top