WANTED: Interior trim pieces 86 C10 Preferably Beige/Tan color and Door panels

[Juan Cano]

Looking for pretty much all the interior trim plastic pieces for a 1986 C10 Silverado in Beige/tan; the ones around the doors, the pillars, etc. Don't need the under the dash kick panels.

Also looking for door panels for electric window in the same color, in decent shape, with no tears and not missing a lot of parts ideally.

Thank you all!

 

[AyWoSch Motors]

Looking for pretty much all the interior trim plastic pieces for a 1986 C10 Silverado in Beige/tan; the ones around the doors, the pillars, etc. Don't need the under the dash kick panels.

Also looking for door panels for electric window in the same color, in decent shape, with no tears and not missing a lot of parts ideally.

Thank you all!

I bought a cab off an 86 C20, interior included. It has a tan interior.
I have the headliner pad, all the trim that goes around it, the panels that go down the windshield, kick panels, and various other bits. Also have the trim peices that go around the rear window where the seat belts are, but they're cracked. Possibly repairable, and otherwise in good shape, and would look good installed.
Dont have the seat, carpet or seatbelts, already sold.
I do have one door panel and lower carpeted trim peice for the door.
Power window power lock, with fabric pad. Not cracked not torn, just dirty. Needs a scrub.

If your interested, let me know, and I can go take some pictures tomorrow.

 

[Juan Cano]

I bought a cab off an 86 C20, interior included. It has a tan interior.
I have the headliner pad, all the trim that goes around it, the panels that go down the windshield, kick panels, and various other bits. Also have the trim peices that go around the rear window where the seat belts are, but they're cracked. Possibly repairable, and otherwise in good shape, and would look good installed.
Dont have the seat, carpet or seatbelts, already sold.
I do have one door panel and lower carpeted trim peice for the door.
Power window power lock, with fabric pad. Not cracked not torn, just dirty. Needs a scrub.

If your interested, let me know, and I can go take some pictures tomorrow.

Yes please; not sure it will be cost effective to ship a liner from New Mexico to Rhode Island though. But interested anyway. My truck is not perfect so parts that are pretty good will work. Thank you.

 

[AyWoSch Motors]

Yes please; not sure it will be cost effective to ship a liner from New Mexico to Rhode Island though. But interested anyway. My truck is not perfect so parts that are pretty good will work. Thank you.

Sounds good, will do. I'll go take some now before it gets too dark.

The headliner is pretty soft and playable surprisingly, I could maybe roll it and use it wrap the other parts. Itd be good atleast for a template, fabric is gone anyhow, but the pad is not ripped.

 

[AyWoSch Motors]

Sorry, it's still in the truck, and setting sun makes for a terrible pic, but here it is.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[AyWoSch Motors]

And heres the upper windshield peice and those 2 that broke.
As you can see they fit in well, if you use some epoxy, they can look good.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

And heres my 2 kick panels of you want them too.

You must be registered for see images attach

You must be registered for see images attach

 

[AyWoSch Motors]

And heres my one door panel I have for passenger side. It's not ripped or torn, fabric is in good condition, just needs a wash.
It has the upper trim panel, but it needs the pull handle and the door pocket, and the little chrome covers that go around the switches. Also have the upper trim peice for the other door panel, that I dont have.

You must be registered for see images attach

You must be registered for see images attach

And heres the door it came off, it has the lower carpeted trim peice and still has all the power window wiring and motors.

You must be registered for see images attach

 

[Rickf]

I've had doors for my '37 GMC shipped via Greyhound Bus from CA to MA. I don't recall the cost but I didn't have heart failure. A bunch of plastic parts shouldn't be a big deal. I needed to pick up at the closest bus terminal, just a thought.