WANTED: EGR 350 Intake

[AyWoSch Motors]

Here are some pics. Cleaned and sanded the intakes, all gasket ready.

You must be registered for see images attach

You must be registered for see images attach

And heres everything else you may be intersted in. Layed it all out on a tarp.

You must be registered for see images attach

You must be registered for see images attach

And heres the junk block. Anything you can think of that you'd like off what's left of the block, you can have too.

You must be registered for see images attach

 

[oldretiredafguy]

The bracket on the front of the block.

 

[AyWoSch Motors]

The bracket on the front of the block.

Sure thing. I'll have to double nut it, because those are studs. Tried to mess with it, but I gave up because I really didnt need to take it off at the time. I'll get it for you.

Today while searching around I found the water pump off that vortec too, forgot I had it. Do you want that also? In good shape, spins easily.

You must be registered for see images attach

And I looked at the computer and the harness today. I was mistaken about the harness being cut, its completely intact and still in the truck.

You must be registered for see images attach

Also, did you want just the computer, or do you want the whole set up thats on the fender?
Includes the computer, engine side fuse box, and ABS brain, all hooked together.

You must be registered for see images attach

And I found that I have the AC compressor lines and condenser in the truck too if you're intersted.

You must be registered for see images attach

P.S., dont let the cab and grill confuse you, they're both from a 93, but the entire front clip, and everything bolted to it is off a 97.

 

[oldretiredafguy]

Might as well get it all. Will probably make it easier for the guy who will be doing the work for me.

Photo of my '88 V-Jimmy that I bought new, with the OEM aluminum wheels.

You must be registered for see images attach

 

[AyWoSch Motors]

Might as well get it all. Will probably make it easier for the guy who will be doing the work for me.

Photo of my '88 V-Jimmy that I bought new, with the OEM aluminum wheels.

You must be registered for see images attach

Ah yes, I believe you've shown me pics of those before. I've never seen a set quite like that before, but I'll keep an eye out for you.

Okay, I'll add that up.
I'll work on getting it all disconnected and unbolted.

 

[AyWoSch Motors]

Got it all out successfully.
There's the whole system, ECM computer, relay and fuse box, ABS brain, the bracket that holds them, and complete harness.
And there in the back are the condenser lines.

You must be registered for see images attach

Also pulled the condenser, but I forgot to take a picture.

 

[Rusty Nail]

Do you know the new guy @Spareparts? He is looking into ditching a TBI system and maybe you could buy his!
I've got a 1 ton 4 bbl 1980 iron intake i'll give you in OKC on your way home.
Eh?
Yeah yeah pix but im at work.

 

[AyWoSch Motors]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[oldretiredafguy]

This is the '86 C20, with the aftermarket grille. Will a '83 or '84 fit in this '86?

You must be registered for see images attach

 

[AyWoSch Motors]

This is the '86 C20, with the aftermarket grille. Will a '83 or '84 fit in this '86?

You must be registered for see images attach

Yes, either of those will fit your truck very well.
The second one would fit the style your truck a little better, but the first one looks alot nicer.
I've never been the biggest fan of those phantom grills either, stock would be much better, although it doesn't look terrible on yours.
That is a great looking truck.

 

[Rusty Nail]

I like that grille.

 

[oldretiredafguy]

I like that grille.

I'll swap it for the intake you mentioned!

 

[Rusty Nail]

Okay. I'll post a pic even.

 

[AyWoSch Motors]

My 1991 GMC grill if your interested...

You must be registered for see images attach

 

[Rusty Nail]

Oh yeah , a pix.
# 346250

WHOOPS!
That's not what you want . BUT!
Good luck searching one.