Transfer case support brace. Who got one to sell?

[Nasty-LSX]

Are these all the same for K10 K20?
I have a 208 with a 700R4 thats missing
the brace. What shoulkd I look out for
when buying this from someone??
Thanks

You must be registered for see images attach

 

[nvrenuf]

The length varies, I'd hunt by measurement (bellhousing surface to the first tcase bolt) the good thing is that the tcase holes in the bar are oval so your measurement could be off 1/8"ish.

 

[dragstews]

Just got done working on a crossmember on a 75 K15 ..

You must be registered for see images attach

Kind of the same deal you have going down .
Trans is 4L85E T-case 203 ..
Was going to reuse the K15 crossmember with making a spacer between the member and trans mount ..
But went ahead and got a after/market one ..

Tejas SteelWorks 4WD High Clearance Crossmember – Tejas SteelWorks, Inc.

tejassteelworks.com

Opps ... Nevermind .. Lol

 

[Nasty-LSX]

Just got done working on a crossmember on a 75 K15 ..

You must be registered for see images attach

Kind of the same deal you have going down .
Trans is 4L85E T-case 203 ..
Was going to reuse the K15 crossmember with making a spacer between the member and trans mount ..
But went ahead and got a after/market one ..

Tejas SteelWorks 4WD High Clearance Crossmember – Tejas SteelWorks, Inc.

tejassteelworks.com

Opps ... Nevermind .. LOl

Looks good. I did not know Scotty was doing the crossmembers. I'll look into that also.
I need better clearance for dual exhaust with headers!!

 

[dragstews]

81-87 CHEVY GMC TRUCK BELL HOUSING TO NP208 / NP241 TRANSFER CASE SUPPORT ROD | eBay

Find many great new & used options and get the best deals for 81-87 CHEVY GMC TRUCK BELL HOUSING TO NP208 / NP241 TRANSFER CASE SUPPORT ROD at the best online prices at eBay! Free shipping for many products!

www.ebay.com

 

[Originalthor]

I have one for a 700r4 to np241. I can get some measurements to see if it works for you.

 

[dragstews]

I'm wanting to install one on my Frankenstein too ..

It's a 4L80E married to a NP203 with using a custom adapter ..
( Most likely some modifying will be needed )

You must be registered for see images attach

 

[Nasty-LSX]

I have one for a 700r4 to np241. I can get some measurements to see if it works for you.

Awesomeness!! you have a PM.

 

[Nasty-LSX]

I'm wanting to install one on my Frankenstein too ..

It's a 4L80E married to a NP203 with using a custom adapter ..
( Most likely some modifying will be needed )

You must be registered for see images attach

I thought about making one out of stainless steel with pretty tig welds and all. Cheaper to just buy one
it's like the older I get, the less fab work I want to do.

 

[Nasty-LSX]

81-87 CHEVY GMC TRUCK BELL HOUSING TO NP208 / NP241 TRANSFER CASE SUPPORT ROD | eBay

Find many great new & used options and get the best deals for 81-87 CHEVY GMC TRUCK BELL HOUSING TO NP208 / NP241 TRANSFER CASE SUPPORT ROD at the best online prices at eBay! Free shipping for many products!

www.ebay.com

I offer him $50 and he never replied!! a couple days ago

 

[dragstews]

I offer him $50 and he never replied!! a couple days ago

I offered $100 and got a no in less than 5 seconds ..
Even at that I was not wanting to pay that much ..

So ... Going to get off my lazy ass and make one, won't be stainless unless I find it dumpster diving !!

You must be registered for see images attach

 

[Nasty-LSX]

Just got done working on a crossmember on a 75 K15 ..

You must be registered for see images attach

Kind of the same deal you have going down .
Trans is 4L85E T-case 203 ..
Was going to reuse the K15 crossmember with making a spacer between the member and trans mount ..
But went ahead and got a after/market one ..

Tejas SteelWorks 4WD High Clearance Crossmember – Tejas SteelWorks, Inc.

tejassteelworks.com

Opps ... Nevermind .. Lol

who made the crossmember spacers?

 

[Nasty-LSX]

I offered $100 and got a no in less than 5 seconds ..
Even at that I was not wanting to pay that much ..

So ... Going to get off my lazy ass and make one, won't be stainless unless I find it dumpster diving !!

You must be registered for see images attach

If I cant find one cheap. I'm going to make one in stainless. My niece has pull at a steel facility she works at.
I get aluminum, stainless, and carbon steel at next to nothing rates. If you want I can send you enough material
to make your own if interested. Just pay shipping!

 

[dragstews]

who made the crossmember spacers?

I did ...
Out of a solid alum. block ..

You must be registered for see images attach

Dang chore it is doing a 4L80 ..
Just got done hooking up the column shifter ..
Found out I have no low or second .. Gate not long enough ..

 

[dragstews]

If I cant find one cheap. I'm going to make one in stainless. My niece has pull at a steel facility she works at.
I get aluminum, stainless, and carbon steel at next to nothing rates. If you want I can send you enough material
to make your own if interested. Just pay shipping!

Cool beans ... Count me in ..