Tire size question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dlefler

Junior Member
Joined
Feb 10, 2022
Posts
19
Reaction score
13
Location
Moline illinois
First Name
Doug
Truck Year
1984
Truck Model
K10
Engine Size
5.7
This has probably been asked a hundred times but will 33x12.50xr15 fit on a 84 k10 without rubbing? I recently took a 3 inch body lift off that the previous owner installed. It looks like they will fit without rubbing but I have not tried driving it around yet. I want to get 31s but this is what I got for now.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,438
Reaction score
28,342
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Depends on the wheel being used, but there will likely be minor rubbing at the lower fender corners when turning and going over a bump.
 

AyWoSch Motors

The Parts Guy
Joined
Nov 6, 2020
Posts
4,690
Reaction score
13,692
Location
New Mexico
First Name
Ayden
Truck Year
1986
Truck Model
K1500 Sierra
Engine Size
350ci V8
The guy that I bought my 86 K15 from, said he used to run 33s on it with a stock suspension, and they didnt run the body at all, but he said they rubbed the steering arm or something like that so he took them off.
I run those exact same 33s on my blazer, and and they dont rub, but I've taken off so much weight, that it sits higher naturally so...
 

Dooley

Full Access Member
Joined
Mar 19, 2014
Posts
377
Reaction score
987
Location
North Coast
First Name
RW
Truck Year
1988
Truck Model
V30
Engine Size
454
This has probably been asked a hundred times but will 33x12.50xr15 fit on a 84 k10 without rubbing? I recently took a 3 inch body lift off that the previous owner installed. It looks like they will fit without rubbing but I have not tried driving it around yet. I want to get 31s but this is what I got for now.
I run 33/12.50-15's on a K10 for near 40 years and they never hit/rubbed anything except the right side running board once in a while if bouncing through a turn. That was using GM 15x8 wheels. It would happen more when using 15x10's the short time I had the Jackman wheels on my 81 plow truck.
 

Attachments

  • Homer7 .JPG
    Homer7 .JPG
    39.1 KB · Views: 76

85K304SPD

Full Access Member
Joined
Mar 29, 2022
Posts
472
Reaction score
702
Location
Las Cruces, NM
First Name
Richard
Truck Year
1985
Truck Model
K30
Engine Size
402
Probably will require a little clearance on the lower rear corners. You can cut the bottom of the fender behind the lip and fold it back and overlap it and you can hardly tell that its modified.
 

Attachments

  • 20220430_142455.jpg
    20220430_142455.jpg
    140.2 KB · Views: 84

Dlefler

Junior Member
Joined
Feb 10, 2022
Posts
19
Reaction score
13
Location
Moline illinois
First Name
Doug
Truck Year
1984
Truck Model
K10
Engine Size
5.7
Probably will require a little clearance on the lower rear corners. You can cut the bottom of the fender behind the lip and fold it back and overlap it and you can hardly tell that its modified.
That's a great looking truck
 

85K304SPD

Full Access Member
Joined
Mar 29, 2022
Posts
472
Reaction score
702
Location
Las Cruces, NM
First Name
Richard
Truck Year
1985
Truck Model
K30
Engine Size
402
That's a great looking truck
Thank you! It's my "other" Square. But I am sure starting to like it. Its easier to get in and out of, and it has a Big Block in it!
 

Latest posts

Forum statistics

Threads
44,157
Posts
950,582
Members
36,271
Latest member
jstewart7501
Top