Throttle sticking

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

blkgmcv3500

Junior Member
Joined
Dec 2, 2023
Posts
6
Reaction score
1
Location
maine
First Name
william
Truck Year
1987
Truck Model
v3500
Engine Size
7.4

what would cause the throttle to stick on 1987 7.4 tbi only when trying to depress the accelerator. when the engine is off the accelerator moves free​

 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,451
Reaction score
8,696
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350

what would cause the throttle to stick on 1987 7.4 tbi only when trying to depress the accelerator. when the engine is off the accelerator moves free​

Check that the cable isn't binding and clean throttle plates.
 

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,538
Reaction score
4,584
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Also could be iac hanging up or possibly bad tps sensor causing high idle. Had that before. Thought throttle was sticking.
Also check cruise control pod sticking?
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,937
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
If base idle isn't adjusted properly throttle plates can stick. In other words throttle is closed too much causing plates to stick in the bore. Disconnect throttle cable to isolate it from the TBI unit. Check if it still sticks.
 

Latest posts

Forum statistics

Threads
44,168
Posts
950,776
Members
36,283
Latest member
Cantrell299
Top