chairmnofthboard
Junior Member
- Joined
- Nov 26, 2023
- Posts
- 6
- Reaction score
- 2
- Location
- California
- First Name
- Xavier
- Truck Year
- 1987
- Truck Model
- Silverado
- Engine Size
- 5.7
Hello everybody. I thought I would make a post to help people in the future.
I recently triggered a code 32 (EGR). I started getting the SES light at cruising speeds on the hwy everyday. My o2 sensor, egr, icm, and EGR are all new with ACdelco, so I knew that wasn't the problem.
All my tests came back as everything "good". I knew my intake had a small oil leak so I decided to change the gasket and rebuild the TBI. I found the intake manifold gasket had been leaking exhaust gasses into the engine valley (under the manifold) and creating essentially coal.
I put everything back together with new gaskets and the truck runs great and no more code 32.
I hope this helps.
I recently triggered a code 32 (EGR). I started getting the SES light at cruising speeds on the hwy everyday. My o2 sensor, egr, icm, and EGR are all new with ACdelco, so I knew that wasn't the problem.
All my tests came back as everything "good". I knew my intake had a small oil leak so I decided to change the gasket and rebuild the TBI. I found the intake manifold gasket had been leaking exhaust gasses into the engine valley (under the manifold) and creating essentially coal.
I put everything back together with new gaskets and the truck runs great and no more code 32.
I hope this helps.
Last edited:
