Rusty Nail
Full Access Member
- Joined
- Jan 29, 2015
- Posts
- 10,041
- Reaction score
- 10,137
- Location
- the other side of the internet
- First Name
- Rusty
- Truck Year
- 1977
- Truck Model
- C20
- Engine Size
- 350sbc
Honeh!
Strange brake dragging problem
- Thread starter MikeB
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
MikeB
Full Access Member
- Joined
- Apr 4, 2014
- Posts
- 1,782
- Reaction score
- 1,020
- Location
- North Texas
- First Name
- Mike
- Truck Year
- 1969
- Truck Model
- C10
- Engine Size
- 355
Having worked with cars and electronic equipment for longer than I care to admit, I can say they have a lot in common when it comes to troubleshooting.
MikeB
Full Access Member
- Joined
- Apr 4, 2014
- Posts
- 1,782
- Reaction score
- 1,020
- Location
- North Texas
- First Name
- Mike
- Truck Year
- 1969
- Truck Model
- C10
- Engine Size
- 355
This is a follow-up to this thread I started back in April:
After 500 miles or more on the new brake drum, there have been no lock-up or dragging issues. And much of the driving since then has been on 95-105 degree days with a load in the bed.
I keep forgetting to check wheel center temperatures, but I'd bet they are close to the same on both sides.
So the problem followed the drum -- all the way to our recycling center!
Must have been that t-shooting skill I learned as an electronics technician.
After 500 miles or more on the new brake drum, there have been no lock-up or dragging issues. And much of the driving since then has been on 95-105 degree days with a load in the bed.
I keep forgetting to check wheel center temperatures, but I'd bet they are close to the same on both sides.
So the problem followed the drum -- all the way to our recycling center!
Must have been that t-shooting skill I learned as an electronics technician.
Similar threads
Latest posts
-
-
-
CUCV Brush Guard dimensions does anyone know them including the thickness of material?
- Latest: Trucktruxktrukk
