Silverado trim help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

My78truck

'Ol Holly
Joined
Apr 7, 2019
Posts
307
Reaction score
260
Location
Virginia
First Name
Becky
Truck Year
1978
Truck Model
C10 Silverado
Engine Size
5.7L
Can someone direct me to a good pinstriping tape that actually will stick? My Silverado trim has the black on it and some of the color has faded off. I thinking taping it off and repainting will be quite the ordeal. I ordered some penstripe off Amazon and it is junk - doesn't even stick even after I cleaned the application area with acetone.

Thanks
 

Tank6x2

Supporting Member
Supporting Member
Joined
Mar 27, 2017
Posts
837
Reaction score
708
Location
Edmonton Alberta Canada
First Name
Kurt
Truck Year
79/86
Truck Model
C30
Engine Size
350, TH400.4:10 gears 2WD
Go to a decal shop, they’ll usually lead you in the right direction
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,400
Reaction score
28,186
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
3M, Trim Brite and Avery are all pretty good.
 

My78truck

'Ol Holly
Joined
Apr 7, 2019
Posts
307
Reaction score
260
Location
Virginia
First Name
Becky
Truck Year
1978
Truck Model
C10 Silverado
Engine Size
5.7L
Hello Fellow Square Body Peeps -

Still working on my '78, down to tailgate, spraying on bedliner, and exterior trim - just getting around to the trim :confused:.

Question #1 - My trim has oxidized - no surprise there for a 44 year old truck. I would really appreciate some expert advice on how to bring the luster back to my trim and keep it looking nice.

Question #2 - I started this thread asking about trim pinstripe. After further investigating, at some point there was black pinstripe placed over the original painted black stripe in it. If I decided to paint it, how do i prep and what do i use to paint it. Or........should I just use a quality pinstripe and if so, what width? I measured the stripe to be 3/8", but I cannot find quality 5/8"........any suggestions??

Thanks for the help as always.
 
Last edited:

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
6,932
Reaction score
12,151
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
The trim is aluminum if I'm not mistaken. Question is, is it anodized? I believe so.
There's a thread about tailgate bands, above. That will likely be what you want to do. But I'd first try polishing it with compound and a rotary ball/pad.
Note I tried sanding off anodizing once....DON'T! It just messed the piece up.
 

mtbadbob

Full Access Member
Joined
May 9, 2021
Posts
654
Reaction score
1,019
Location
Montana
First Name
Bob
Truck Year
1987
Truck Model
V20
Engine Size
350
Try using a very fine Scotchbrite pad first, then some Never Dull on the aluminum
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,400
Reaction score
28,186
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
If you want to paint the inset color again, just mask it off, lightly scuff it with a scotchbrite pad, then spray it.


Applying WD-40 to the anodized aluminum trim will make it look much better, but it doesn't last long.
 

Forum statistics

Threads
44,075
Posts
948,841
Members
36,144
Latest member
wolfdog63
Top