Recommendations? Sway bar

[radio2000]

'88 R10 burb lowered, she has a lot of lean. New shocks and springs
What's everyone running? Thoughts?


Sent from my iPhone using Tapatalk

 

[1987 GMC Jimmy]

@Old77

 

[Supersoaker]

I got the same thing on my c10

 

[Old77]

'88 R10 burb lowered, she has a lot of lean. New shocks and springs
What's everyone running? Thoughts?


Sent from my iPhone using Tapatalk

Check out Western Chassis Inc. I believe they may have sway bars for square burbs.

 

[Zoomalot]

If we are talking front-end. I changed to CPP 1.25" dia. sway bar and it made a BIG positive change.
Took out that big boat feel.

 

[radio2000]

If we are talking front-end. I changed to CPP 1.25" dia. sway bar and it made a BIG positive change.
Took out that big boat feel.

Actually looking at doing front and rear
I'm really liking the Bell tech kit
You have the part# for the CPP piece?


Sent from my iPhone using Tapatalk

 

[skysurfer]

I'm running a model 7535 Hellwig bar in the back and added poly bushings to the front. Being lifted with a roof rack, the truck was leaning badly but the mods tamed it down pretty well provided I don't drive like a madman.

 

[radio2000]

Installed the Belltech 5404 Saturday.
Exceeds expectations in the difference it made. Front tires no longer scrub inner fenders and it has a much more controlled ride. Very easy installation
Think I'm gonna do their rear bar in the next week or two

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[eskimomann209]

Did you need to drill the arms
Or did it use an existing hole?

 

[eskimomann209]

Ok found the instructions online it says to drill out the existing holes

 

[shiftpro]

Even a stock anti-sway bar with poly bushings makes a difference. But bigger is better... unless it's a 4x4 then it doesn't seem to matter even to remove it. Rides better actually.