Power Window Help

[smpoulin1]

Hey guys,

Bit of a frustrating question - Both power windows on my 85 quit working. I have the relay kit from LMC installed. They were working fine then---Poof! no power windows. I have checked the fuses in the LMC Kit (fine), looked for a blown fuse in the fusebox (didnt find any), tried different motors and a different driver switch. When you hit the buttons, you can here the relays (LMC kit) clicking but no window movement.

Any suggestions?

Thanks

 

[gmachinz]

You may need to pull the motor leads from the relay kit and try jumping the motors with a pair of battery leads-I like to use fully charge 14V DeWalt batteries for this purpose.

I'm not familiar with the LMC kit since I build my own-are theirs a ground trigger conversion like mine or do they keep power (12ga PINK) transferring through the switch?

 

[smpoulin1]

Not sure about the ground switching, I know they supply power from the battery. Jump the motors to make sure they are working?