Passenger turn & side marker lights trouble

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

texdave

Junior Member
Joined
Mar 28, 2024
Posts
6
Reaction score
2
Location
texas
First Name
tex
Truck Year
1976
Truck Model
C10
Engine Size
350
On my 76 Burb, I can't seem to track down what's causing my passenger side turn and side marker lights to not work correctly. Here's how they are functioning right now:
* Turn on hazards = all lights work but passenger turn + side marker lights which don't turn on
* Engage right turn on stalk = passenger turn + side marker lights don't turn on but rear right turn lights work
* Engage left turn on stalk = works as normal
* Turn on headlights = all lights turn on including passenger turn + side marker lights (right turn on stalk still doesn't engage blinking but lights remain on)

I did the following to try to address it:
* Replaced bulbs -- side marker light was out but now works
* Cleaned out the only grounds I could find on the passenger side of the engine bay which were near the front grill area -- one of the wires did seem to go to the side marker light
* Checked the rear light wiring underneath the rear bumper, only saw one ground and it looked clean and tight

Only other related note I can think of is that the turn signal stalk doesn't stay in the up position when I use it to signal a right turn. It flops down to center right away. When signaling a left turn, it seems to engage a bit stiffer but can't tell since gravity may also just be keeping it down.

Any other ideas I can follow up on to get these lights working?
 

Turbo4whl

Supporting Member
Supporting Member
Joined
Oct 30, 2019
Posts
3,125
Reaction score
7,254
Location
Downingtown, PA
First Name
Wayne
Truck Year
1974
Truck Model
Jimmy
Engine Size
350
From what you describe, the most likely cause is the turn signal switch. You can check that switch using the connector to the switch at the bottom of the steering column. There are many more places it can fail so you need a wiring diagram and a test light or meter.
 

Jgonick

Full Access Member
Joined
Jan 12, 2017
Posts
296
Reaction score
376
Location
West Texas
First Name
Joel
Truck Year
1985
Truck Model
K10
Engine Size
350
Dark Blue-15 wire. If I remember correctly (not home currently). Comes from turn signal switch and runs thru bulkhead to right front turn signal. Could be bad turn signal switch or something with DK BLU- 15 wire or it’s connections

Does the dash right turn indicator work? If it does, problem is probably after bulkhead. If it doesn’t, problem is probably before bulkhead(such as turn signal switch).
 
Last edited:

Jgonick

Full Access Member
Joined
Jan 12, 2017
Posts
296
Reaction score
376
Location
West Texas
First Name
Joel
Truck Year
1985
Truck Model
K10
Engine Size
350
Yep- DK BLUE-15

side note- always double check bulbs are good and you are using the correct bulbs. Front turn signal is a double filament bulb.
 

Attachments

  • switch.jpg
    switch.jpg
    109.6 KB · Views: 11
  • signal.jpg
    signal.jpg
    77.2 KB · Views: 9
  • bulk.jpg
    bulk.jpg
    124.9 KB · Views: 11
Last edited:

laurat

Junior Member
Joined
Nov 18, 2024
Posts
2
Reaction score
0
Location
paris
First Name
flow
Truck Year
1980
Truck Model
K25
Engine Size
350
Your 1976 Suburban's passenger-side turn and side marker light issue is likely due to a problem in the wiring, grounding, or the turn signal switch itself.
 

Latest posts

Forum statistics

Threads
44,151
Posts
950,431
Members
36,267
Latest member
32inchredfish
Top