Oil Leak Into Cab

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DANNILAFAELE32

Junior Member
Joined
Jul 22, 2024
Posts
3
Reaction score
0
Location
utah
First Name
danny lafaelr
Truck Year
1986
Truck Model
1500
Engine Size
350
Hello everyone, I’ve got an 1986 GMC K1500 with an oil leak going into my cab under the dash right in the center. Yes! It is oil not coolant or tranny fluid. Does anyone or has anyone ever come across this issue? I have no idea how this happened and I have never heard of this before. Thank you for your time
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,302
Reaction score
2,271
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
‘86 has an electric sending unit, so no oil leak into the cab is possible. Up until about ‘76 they used a mechanical oil pressure gauge with an oil line into the cab. Did someone swap your gauge cluster?
 

Rickf

Full Access Member
Joined
Jul 29, 2017
Posts
574
Reaction score
716
Location
Grafton NH
First Name
Rick
Truck Year
1974, 1954 & a 1937
Truck Model
K20
Engine Size
350
Could have been changed to or added a mechanical gauge. Is it dirty or clear-ish? PAG type oil from an a/c system? More info is needed.
 

DANNILAFAELE32

Junior Member
Joined
Jul 22, 2024
Posts
3
Reaction score
0
Location
utah
First Name
danny lafaelr
Truck Year
1986
Truck Model
1500
Engine Size
350
Leak in the line to or at, the Oil Pressure gauge.

You're the first person to have this problem.
That makes sense. It’s coming right under the dash through the firewall and I have no idea how. Might have to remove the ac vents so I can get a better look at it
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,591
Reaction score
28,779
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
That makes sense. It’s coming right under the dash through the firewall and I have no idea how. Might have to remove the ac vents so I can get a better look at it

Is there an aftermarket oil pressure gauge installed?
 

DANNILAFAELE32

Junior Member
Joined
Jul 22, 2024
Posts
3
Reaction score
0
Location
utah
First Name
danny lafaelr
Truck Year
1986
Truck Model
1500
Engine Size
350
All of my heater controls are vacuum operated. I’d it possible that I am sucking oil through a vacuum line off the manifold?
 

Ricko1966

Full Access Member
Joined
Apr 11, 2017
Posts
5,584
Reaction score
9,064
Location
kansas
First Name
Rick
Truck Year
1975
Truck Model
c20
Engine Size
350
It is possible and not unheard of to push oil through the wire going to the electric gauge there's enough space between the wire strands that oil under pressure can be pushed up the wire,the jacket contains it until it gets to the other end. I do not know where the speedometer drive is on an 86k but gear oil can be pushed up speedometer cables also. Pull the wire at the oil pressure switch's see if oil drips out of the boots.
 
Last edited:

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,591
Reaction score
28,779
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
It is possible and not unheard of to push oil through the wire going to the electric gauge there's enough space between the wire strands that oil under pressure can be pushed up the wire the jacket contains it until it gets to the other end. I do not know where the speedometer drive is on an 86k but gear oil can be pushed up speedometer cables also. Pull the wire at the oil pressure switch's see of oil drips out of the boots.

You just reminded me of something that I always wondered about... and you answered my question too! So maybe 20 years ago, Chrysler put out an updated oil pressure sender pigtail for a lot of their mid and late 90's cars. They had problematic and leaky oil senders. But anyway, the updated pigtail had a tiny little hose coming out of the connector. I always wondered "how the hell is that supposed to improve anything"? I thought it was really dumb.

But now I know why! That hose vented the leaking oil and kept it from pushing up the strands of the wire and ruining it. Of course, I guess it still didn't matter much because those cars were terrible with underhood wiring anyway, lol.
 

Dooley

Full Access Member
Joined
Mar 19, 2014
Posts
377
Reaction score
988
Location
North Coast
First Name
RW
Truck Year
1988
Truck Model
V30
Engine Size
454
‘86 has an electric sending unit, so no oil leak into the cab is possible. Up until about ‘76 they used a mechanical oil pressure gauge with an oil line into the cab. Did someone swap your gauge cluster?
My 1977 K10 Suburban had a mechanical oil pressure gauge from the factory.
 
Last edited:

ballencd

Full Access Member
Joined
Aug 30, 2013
Posts
119
Reaction score
55
Location
Columbus, NC
First Name
Charlie
Truck Year
1988/1991/1983/1984
Truck Model
V10 Suburban/V1500 Suburban/M35 bobbed w/dump/M1010
Engine Size
5.7/5.7/LDT 465-1c/6.2 diesel
I had a VW that had an oil leak once!
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,591
Reaction score
28,779
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454

Forum statistics

Threads
44,391
Posts
956,267
Members
36,679
Latest member
86C25
Top