No turn signals but hazards work

[Fjordlander]

Hello all,

I just replaced my turn signal switch and got the steering column all back together but now the turn signals don't work. The hazards work just fine and the switch clicks to the left and the right as expected but still no signals. Any ideas for me to check?

 

[squaredeal91]

Did you replace the switch because it wasn't working? What's the back story?

 

[Fjordlander]

Did you replace the switch because it wasn't working? What's the back story?

Yes. Switch was no longer working. When I took it out the plastic eas broken in a few spots. Turn signals worked fine before the old switch broke

 

[squaredeal91]

Maybe something happened during installation. Check all fuses out.

 

[Fjordlander]

Maybe something happened during installation. Check all fuses out.

They all look fine but I'll replace the signal fuse and see

 

[PrairieDrifter]

The turn signals have their own relay separate of the hazards.

 

[Fjordlander]

The turn signals have their own relay separate of the hazards.

I'll see if I can get a replacement relay locally tomorrow. All the fuses look fine and I replaced the turn signal fuse and it didn't help

 

[Fjordlander]

The issue ended up being the purple wire. I had a break in the connection so I just cut the wire and spliced it back together and now my signals work