No Defrost

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

84GMCSierra

Full Access Member
Joined
Feb 26, 2023
Posts
385
Reaction score
452
Location
Central Arizona
First Name
Paul
Truck Year
1984
Truck Model
C2500
Engine Size
350
Good Afternoon members. I have a question concerning my defrost not working on my 84 C2500. I'm wanting to know if this little "pot" could be the culprit? The defrost worked for a couple years then went screwy and quit working, but the regular heat works just fine. The "Defroster Actuator" is what I'm referring to under the dash on the side of the box assembly. Can these be replaced, or could it be in my switch panel? Any and all help will be greatly appreciated. Thanks
 

Attachments

  • IMG_0944.JPG
    IMG_0944.JPG
    121.1 KB · Views: 62
  • IMG_0945.JPG
    IMG_0945.JPG
    128.6 KB · Views: 38

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,304
Reaction score
2,272
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
You can use a hand vacuum pump to pull vacuum on the actuator and see if it works. If it still works, then it’s probably the lines to the controls.

Do the rest of the actuators work when you change hvac positions. For example, if you put it in max a/c you should see the flap open in the passenger side footwell, to go to recirculate.
 

84GMCSierra

Full Access Member
Joined
Feb 26, 2023
Posts
385
Reaction score
452
Location
Central Arizona
First Name
Paul
Truck Year
1984
Truck Model
C2500
Engine Size
350
I took the AC out in 2019 when I bought the truck so not sure about that part. I will check the rest of the positions though. Thanks
 

WFO

Full Access Member
Joined
Jan 6, 2017
Posts
3,714
Reaction score
5,103
Location
Texas Panhandle
First Name
Dan
Truck Year
1986
Truck Model
K20
Engine Size
350
Do you have vacuum to the actuator?
 

84GMCSierra

Full Access Member
Joined
Feb 26, 2023
Posts
385
Reaction score
452
Location
Central Arizona
First Name
Paul
Truck Year
1984
Truck Model
C2500
Engine Size
350
Do you have vacuum to the actuator?
Probably not but will check. know the line that goes in the firewall on the right side keeps coming apart. It was broken so I tried a piece of 1/4" tubing over it to connect the 2 pieces. I'll try to get a pic. Not sure if it'd the line for the defrost or what.
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,877
Reaction score
5,710
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
Probably not but will check. know the line that goes in the firewall on the right side keeps coming apart. It was broken so I tried a piece of 1/4" tubing over it to connect the 2 pieces. I'll try to get a pic. Not sure if it'd the line for the defrost or what.
That line is the main vacuum supply for the hvac. You need to make sure that's proper.
 

neiltee

Junior Member
Joined
Jun 22, 2022
Posts
8
Reaction score
3
Location
San Marcos, CA
First Name
Neil
Truck Year
1975
Truck Model
K10
Engine Size
LS6
If you are looking for replacement parts try "Old Air Products"
 

Latest posts

Forum statistics

Threads
44,414
Posts
956,951
Members
36,735
Latest member
rljohnson013
Top