New member in NE Washington

[75Monza]

Hi, just thought I would join up instead of lurking. I have two square bodies, an 82 K20 rust-bucket that is my plow truck with a 4" lift and an 86 Silverado K20 383/th400 with 8" lift that I am getting ready to swap axles to Dana 60 in front and 14 bolt FF in rear. 37" tires pretty much wiped out my 10 bolt front and don't like a semi-float for the rear. Tough part is finding a Dana 60 where I live , plenty of dana 44 or 10 bolt. Figured I would most likely have some questions in my swap, so could probably find them here.

 

[Fullboardmax]

Welcome

 

[Old77]

 

[1973c10]

Welcome aboard

 

[BiggG74]

Welcome to the site.


Sent from my iPhone using Tapatalk

 

[CSFJ]

Welcome

 

[Rusty Nail]

Cool. What can you tell us about the MONZA? Did it have a 262 in it and will you sell me the crankshaft for cheap?

Please?

 

[Derick C.]

Welcome... Do I see a red square in the back?

 

[WFO]

Welcome from the Texas Panhandle.

 

[74 Shortbed]

Welcome to the site.

 

[75Monza]

Rusty Nail...I have 2 75 Monza California edition town coupes with factory 350's, one by code came with the saginaw 4 speed and have a 76 Monza coupe with 305 factory. Sorry, don't have 262. Guy in spokane area had one one craigslist for awhile at this link https://spokane.craigslist.org/pts/6074732267.html .
Derick, Rusty Red in the background is my 82 K20, rusted body, 4" lift new 350, 4 speed...it's my plow truck.

 

[75Monza]

Here is my 82...just yanked the motor, changing the heads and cam, want more than stock grunt for plowing.

 

[CSFJ]

From that angle, that plow truck doesn't look too bad.

 

[75Monza]

Flinstones floorboards, 1/4 of the inner fenderwells gone and see through drivers door...it was used as a liquid snow melt sprayer for parking lots. Best way to dissolve a square body, lol.

 

[CSFJ]

Lol. Over here in Michigan, we're pretty efficient at disolving them too. You must have just happened on the truck's one good angle.